Multitech RF760 User's Guide download pdf (Page 16)

Chapter 3 – Configuration

16 Multi-Tech Systems, Inc. RF760/660/600VPN Quick Start Guide (82013762L)

The Wizard Setup Screen

Click on the Wizard Setup button located under the Menu Bar. The following screen displays.

1. Enter your Administrator Email Address (can be anything).

2. Enter your Hostname for the RouteFinder VPN (can be anything).

Example: RouteFinder VPN.domainname.com

3. LAN IP Address and Subnet Mask default into the fields. These should be acceptable for your site.

4. Enter the WAN IP Address. This is the PUBLIC STATIC IP address.

Set this option based on information provided by your ISP. Example: 204.26.122.103

5. Change the Gateway IP address; this is the IP address of the router that connects to the Internet. Example:

204.26.122.1

6. Place a checkmark in the Packet Filter Rule LAN-ANY-ANY-ALLOW box to enable the rule.

7. Change Password Settings as appropriate for your network. It is highly recommended that you change all

default passwords. Do not leave them at the defaults for security reasons.

8. Click Save to save the settings you just entered.

9. The following message displays. Click OK to close the message box and save your changes.

Click OK to save the changes. Please be patient. Wizard

Setup will take a few minutes to implement the changes. Do not

close the Browser.

10. One more message displays. Note that saving your settings will take 1-2 minutes.

Please do not close the browser. Server is saving the values.

After a few minutes you will be redirected to the new IP address.

If you are not redirected, change the address in the location bar

to 192.168.2.1.

11. Test your workstation to see that it can access the Internet. If a connection is established, then the settings

have been entered correctly.

Your Basic Configuration Is Now Complete.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 27 28

No comments

Multitech RF760 User's Guide Page 16