Multitech MTCMR-H Specifications download pdf (Page 6)

MultiConnect AW Analog-to-Wireless Converter

6 Multi-Tech Systems, Inc. Quick Start Guide

5. Screw-on the power lead from the power supply module to the

power connection on the unit. Now, plug the power supply into

your power source.

Before you start configuring your MultiConnect unit, you should have

established a wireless network account. After you have established your

wireless network account, you can log into your MultiConnect unit using

HyperTerminal or an equivalent terminal emulation program.

1. Go to Start I All Programs I Accessories I Communications and

then click on HyperTerminal.

2. The New Connection screen is displayed. In the Name: window,

enter an applicable name for your MultiConnect connection. Click

OK.

3. In the Connect To screen, change the Connect using: window to

the COM port for the MultiConnect. Click on the down arrow and

select your COM port.

4. In the Com Properties screen, change default Bits per second:

from 2400 to 115200. Click the Apply button and then OK.

At the Login screen, enter the default password of admin

The Introduction Menu is displayed. A question is asked, What would

you like this port to do? Enter Selection => _ Enter A and press

ENTER.

Connecting to your MultiConnect unit using either HyperTerminal or an

equivalent terminal emulation program detects the configuration of the

unit. The Main Menu will display either a GPRS on a MT200A2W unit or

CDMA configuration on a MT200A2W-C.

1 2 3 4 5 6 7 8 9 10 11 12

No comments

Multitech MTCMR-H Specifications Page 6