MultiConnect AW Analog-to-Wireless Converter
Multi-Tech Systems, Inc. Quick Start Guide 11
2. Configure Option B (Protocol) for your CDMA cellular network.
Select either TCPClient, Telnet,
UDP, or PassThru
3. Options F and G are dependent on your local/remote port.
The TCP/IP port that the remote
device is listening on.
The IP address of the remote device
on the network you are going to.
4. Save your configuration by pressing the + key. Then return to the
Main Menu and wait for the cellular wireless network and the
analog modem to change to a READY state. The Current Settings
will change to: (WIRELESS_READY) (ANALOG_READY).
0B
Initial configuration of your CDMA version is complete.
Comments to this Manuals