Multitech MTCMR-E1 User's Guide download pdf (Page 5)

MultiModem rCell Intelligent Wireless Router

Multi-Tech Systems, Inc. Quick Start Guide 5

Insert SIM Card, If required

The MultiModem requires the power supply connection to begin operation.

It also requires a SIM card (Subscriber Identity Module) to operate on a GSM

network. To install the SIM, do the following:

1. Using a small Phillips screwdriver, remove the two SIM door screws

and remove the SIM door.

Note: When changing a SIM, ensure that power is removed from the

unit.

2. Insert the SIM card into the card holder. The above graphic illustrates

the correct SIM card orientation.

3. Verify that the SIM card fits into the holder properly and then replace

the cover.

Connect the Antenna and Power

MTCBA-XX-EN2

MTCBA-XX-EN2-GP

1. Connect a suitable antenna to the SMA connector (see antenna

specifications in Appendix B of the User Guide).

Optional: If you have the GPS version, connect a suitable GPS

antenna to the GPS connector. Ensure that when you position the

GPS antenna, that it can see the sky to locate the satellites for

accurate values.

1 2 3 4 5 6 7 8 9 10 ... 15 16

No comments

Multitech MTCMR-E1 User's Guide Page 5