CHAPTER 11 – ANALOG SOCKETMODEMS
Universal Socket Developer Guide
Recommended Poly Switch Thermal Fuse (SMT)
RayChem / Tyco Electronics
Recommended Poly Switch Thermal Fuse (Thru-Hole)
RayChem / Tyco Electronics
Note: The Fuse & Sidactor are required in order to comply with UL60950 for protection against over-voltages
from power line cross. Fuse can be reset type.
Neltron Industrial Co. (http://www.neltron.com.tw/)
Note: 4-Pin 2.0mm SIP Socket (2 Each)
10-Pin 2.0mm SIP Socket (2 Each)
Telecom
The RJ-11 connector must meet FCC Part 68 requirements. Refer to FCC Part 68 section 68.500 subpart F for
connector specifications. A self-healing fuse is used in series with line to help prevent damage to the DAA circuit.
This fuse is required in order to meet compliance regulations.
Note: Refer to Application Notes in the individual Device Guide for your model.
Comments to this Manuals