28
GS10/GS15, Operation
Connect USB cable
to PC for the first
time
step-by-step
Step Description
1. Start the PC.
2. Plug the GEV234 cable into Port P1 of the instrument (GS10/GS15).
3. Turn on the instrument.
4. Plug the GEV234 cable into the USB port of the PC. The Found New Hard-
ware Wizard starts up automatically.
5. Check Yes, this time only. Next>.
6. Check Install the software automatically (Recommended). Next>. The
software for Remote NDIS based LGS GS Device will be installed on your
PC.
Comments to this Manuals