Multitech CDMA User's Guide Page 53

  • Download
  • Add to my manuals
  • Print
  • Page
    / 67
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 52
Chapter 13 – - Prefix Commands
CDMA 1xEV-D0 AT Commands Reference Guide (Document S000482B) 53
-NAMVAL= NAM Values
Syntax: AT-NAMVAL=<nam> [,<MDN>,<MIN>,<SID>,<NID>] (Set command)
AT-NAMVAL?<nam> (Reads the current account information)
Description: This command has three functions related to the account or NAM (Number Assignment
Module):
Set the Active Account Index
The modem supports one account. Using only the <nam> parameter (0) sets that account
as the active account used by the modem.
Read the Current Account Information
The query form of the command will report the details of the specified account (0):
MDN: 9999999999 (10 digit phone number)
MIN: 9999999999 10-digit MIN (encoded and stored into MIN1 and MIN2)
SID: 99999 (System ID)
NID: 99999 (Network ID)
Write Account Activation Data
This form requires the optional parameters. The modem will first compare the pass code
stored using –NAMLCK (page 84). If the pass code fails to match, the ERROR result is
returned. If the OK result is received, the NAM profile account was successfully activated.
The parameter values are as noted for the query form of the command. The service
provider will tell you what numbers to enter for NUM, MIN, SID, and NID.
NAM must be 0.
Following writing the values, the modem must be reset to have the values take effect.
-RESET Soft Reset
Syntax: AT-RESET
Description: Resets the modem gracefully, shutting down any active connection. The modem issues
the OK result before completing the reset cycle. The reset is complete after approximately
5–15 seconds, after CTS has been deasserted and then reasserted.
-SHTDWN Shutdown
Syntax: AT-SHTDWN
Description: Forces the modem into a shutdown state, gracefully closing any open connection. This
shutdown is deeper than the one achieved by using the control signals on the modem; it
includes closing the serial connections.
Following this command, the modem can be restarted only by power cycling or a hardware
reset.
The Shutdown Acknowledge control line is asserted when the shutdown is complete.
Page view 52
1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 66 67

Comments to this Manuals

No comments