Multitech MT2834ZDX User's Guide Page 5

  • Download
  • Add to my manuals
  • Print
  • Page
    / 33
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 4
Chapter 1 – Introduction and Installation
Multi-Tech Systems, Inc. MT2834ZDX User's Guide 5
Modem Installation
Step 1: Attach the Self-Adhesive Feet
The modem comes with a set of self-adhesive plastic feet, which you can optionally attach to the modem. To
install, simply peel them from their paper strip and press them into the recesses on the bottom of the modem.
Step 2: Connect the Modem to Your System
Turn off your computer. Place the modem in a convenient location, and then connect it to your computer’s serial
port, the phone line, AC power, and your phone.
RS232 Connection
Plug one end of the serial cable into the RS232 connector on the modem, and the other end into a
serial port connector on your computer, such as COM1 or COM2.
LINE Connection
Plug one end of the phone cable into the MT2834ZDX’s LINE jack and the other end into a phone line
wall jack.
Note: The LINE jack is not interchangeable with the PHONE jack. Do not plug the phone into the LINE
jack or the line cable into the PHONE jack.
PHONE Connection
You may optionally plug a telephone into the PHONE jack. This jack is provided as a convenience; you
may also plug a telephone into a duplex jack inserted into your wall jack.
POWER Connection
Plug the power supply module into an AC power outlet or power strip. Plug the power supply’s cable
into the POWER jack on the modem.
Note: Use only the power supply supplied with the MT2834ZDX. Use of any other power supply will
void the warranty and could damage the modem.
Power-On Test
Test the modem by turning it on (a power on/off switch is located on the right side). When you apply
power, the modem performs a diagnostic self-test, indicated by the speed indicators flashing in se-
quence for a second or two, after which the 28 indicator should light. If this does not happen, check that
the power switch is on, the power supply is solidly connected, and the AC outlet is live. If these
measures do not work, see the Troubleshooting chapter..
Page view 4
1 2 3 4 5 6 7 8 9 10 ... 32 33

Comments to this Manuals

No comments