Multitech CC4800 Owner's Manual download pdf (Page 23)

Chapter 4 - Commands

4.2 Commands Listed by Function

In this section, the commands are listed alphabetically by function. The functions are: Display,

Environment, File, Modem Control, and Security.

See Section 4.4 (Command Reference) for expanded descriptions of the commands.

Display

Command Name Parameters Description

getcalls Device Displays call traffic for the device

getfaults Device Displays faults for the device

getmodems Device Displays the current status for the device

Environment

Command Name Parameters Description

cl, clock None Displays current date and time

date None Prompts you for current date

getgateway None Display the configured gateway address

getip None Display the configured IP address

getreadcommunity None Displays the Read community settings

getsendtrap None Displays whether traps are being sent or not.

getsubnet None Display the configured subnet mask

gettrap None Display the configured trap address

getwritecommunity None Displays the Write community settings

setgateway IP Address Configure the gateway address

setip IP Address Configure the IP address

setreadcommunity None Change the Read community settings

setsendtrap On/Off Changes the status of sending traps.

setsubnet IP Address Configure the subnet mask

Mask

settrap IP Address Configured the trap address

setwritecommunity None Change the Write community settings

time None Prompts you for current time

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 63 64

No comments

Multitech CC4800 Owner's Manual Page 23