Multitech MTT1DSU User's Guide download pdf (Page 25)

Configurations

1. T1 Line Configuration

2. DS0 Speed/DS0 Allocation

3. Clocking

4. V.35 Port

5. Set configurations

6. Set and Save configurations

7. Reset to Factory Defaults

Enter Selection (-(previous), q(uit), <1>): _

9. At the Configurations menu, enter option 3 and press the ENTER

key to display the current selection (Internal, Line, or External). If

you want to change to one of the other selections, press the

ENTER key to display the three options. Use Line (option 2) if

connected to a Telco T1 line. For a back-to-back setup, set one unit

for Internal (option 1) (or External, option 3, if your DTE is provid-

ing the 1.544 MHz clock) and set the other unit for Line (option 2).

Clocking

1. Internal

2. Line

3. External

Enter Selection (-(previous), q(uit), <1>): _

Select one of the options from the Clocking menu, then press the

ENTER key to display the following "1. Clocking: (new selection)."

When done, press the minus key "-" and then the ENTER key to

return to the Configurations menu.

Configurations

1. T1 Line Configuration

2. DS0 Speed/DS0 Allocation

3. Clocking

4. V.35 Port

5. Set configurations

6. Set and Save configurations

7. Reset to Factory Defaults

Enter Selection (-(previous), q(uit), <1>): _

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 51 52

No comments

Multitech MTT1DSU User's Guide Page 25