Multitech RF825-C-NX-AP User Manual download pdf (Page 15)

Chapter 1 – Non-NAT Setup Examples

Multi-Tech Systems, Inc. RF825 Series IPSec VPN Setup Examples – A Reference Guide (S000440B) 15

Step 2 for Side B – Packet Filters

1. Go to the Packet Filters screen to setup the other network across the VPN tunnel with the

rights to access across the tunnel

2. Click on From (Host/Networks) and select the network you are allowing (you should already

have the LAN Any Any Accept listed).

3. If you are not restricting the type of service, select Any for the To (Host/Network).

4. Click the Add button to save the Packet Filter rule.

Important Note: Do not

check the Status box. When adding a user-defined rule, leave the

Status box unchecked.

Step 3 for Side B – VPN Setup

1. Go to the VPN > IPSec screen.

2. Click the VPN Status check box to enable IPSec. Then click the Save button.

3. Select Add an IKE Connection by clicking the corresponding Add button.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 32 33

No comments

Multitech RF825-C-NX-AP User Manual Page 15