Multitech MultiModem rCell User's Guide download pdf (Page 35)

Chapter 3 – Using the Web Management Software

Multi-Tech Systems, Inc. MultiModem rCell User Guide 35

88BNetworks & Services > Service Configuration

On this screen you can specify the standard set of well known services available on the system. These services enable the

configuration of the user-defined services. The options to Delete or Edit a service after it has been defined and added are

available by using the table at the bottom of the screen.

Service Configuration

Enter the Name, Protocol, Source Port/Client, and Destination Port/Server for the new Service.

● A Service Name cannot be edited.

● A Service cannot be deleted if it is used in another configuration.

● Service changes are reflected in all the configurations in the Web Management software where they are used.

● Services added here will be displayed in the following sections: DNAT, Packet Filters.

Name: Enter the name of the Service which is limited to 16 characters. It has to be unique.

Protocol: Enter the type of protocol (TCP, UDP).

Source Port: Enter the Destination Port for this service. The source and destination ports can be entered either

as a single port or a range using a colon as the separator.

Destination Port: Enter the name of the Destination Port for the service.

Add Button: Click the Add button. The new service is added and will display on the screen. Packet Filters

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 66 67

No comments

Multitech MultiModem rCell User's Guide Page 35