CHAPTER 3 –SPECIFICATIONS
SocketModem CDMA MTSMC-C2 Device Guide
Mounting Hardware
The board has three mounting holes at corners. Use #4 or M3 hardware for mounting the SocketModem to the
board. Refer to the Mechanical Drawings for more information.
Recommended Parts
3/16” Hex Female Standoff
4.5mm Hex Female Standoff
Device Reset
The SocketModem is ready to accept commands after a fixed amount of time (“X” Time) after power-on or reset.
1
The SocketModem may respond to a shorter reset pulse.
RS-232 Signal DC Electrical Characteristics
Units: Volts
Applies to the following pins:
Absolute Maximum Rating
VCC Voltage (Survival) -0.3V to +5.5V
Comments to this Manuals