Multitech MTCMR-H User's Guide download pdf (Page 19)

Chapter 2 – Activation and Installation

10. To finish the install, click on Finish.

You have now successfully installed the MultiModem driver to your PC.

Verifying That Your Modem Has Been Installed Successfully

1. After you have successfully installed the MultiModem driver as stated above, you should be brought back to

the Phone and Modems Options screen. Make sure that the modem is now listed under the columns

Modem and Attached To (the correct com port).

2. Highlight the modem and then click on Properties.

3. A Properties screen will open for the Multi-Tech modem. Click on the tab labeled Diagnostics.

4. In the middle of the screen, click on the Query Modem button. Windows will now try to query the Multi-Tech

modem. If this process passes, the second box on this screen will show the columns Command and

Response.

Note: To make sure that the modem is correctly being queried, look at the LED lights of the modem after

you click on Query Modem. The TR light should come on and the TD and RD lights should flicker.

5. If this process passes, then the modem should be properly installed and ready for use. Click OK to close the

modem Properties window. Then click on OK to close the Phone and Modem Options window

Multi-Tech Systems, Inc. MultiModem iCell Intelligent Wireless Modem User Guide 19

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 25 26 27

No comments

Multitech MTCMR-H User's Guide Page 19