Multitech MTCBA-C-U Specifications Page 110
- Page / 197
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Chapter 16 – Extended AT Commands in IS707.3
Multi-Tech Systems, Inc. CDMA AT Commands Reference Guide (PN S000294K) 110
Error Control Selection +ES
Description: The extended-format compound parameter is used to control the manner of operation of the V.42 protocol
on the PSTN link (if present in IWF). The command is not relevant for packet service.
Values: <orig_rqst>
0 Direct mode
2 Initiate V.42 Detection Phase
3 Initiate Alternative Protocol
<orig_fbk>
0 Error control optional; If error control not established maintain DTE-DCE data rate
1 Error control optional; If error control not established change DTE-DCE data rate to match line rate
2 Error control required; If error control not established, disconnect
3 Error control required (only LAPM acceptable); If error control not established, disconnect
4 Error control required (only alternative protocol acceptable); If error control not established,
disconnect
<ans_fbk>
0 Direct mode
1 Error control disabled, use Buffered mode
2 Error control optional; If error control not established maintain DTE-DCE data rate
3 Error control optional; If error control not established change DTE-DCE data rate to match line rate
4 Error control required; If error control not established, disconnect
5 Error control required (only LAPM acceptable); If error control not established, disconnect
6 Error control required (only alternative protocol acceptable); If error control not established,
disconnect
Syntax: Command syntax: AT+ES=[<orig_rqst>[,<orig_fbk>[,<ans_fbk>]]]
Command Possible Responses
AT+ES?
Note: Display the current setting.
+ES: 3, 0, 2
OK
Note: Command is valid
AT+ES=1
Note: Set value to 1.
OK
Note: Command is valid
AT+ES?
Note: Display the setting after change.
+ES: 1, 0, 2
OK
Note: Command is valid
Error Control Selective Repeat +ESR
Description: The extended-format numeric parameter is used to control the use of selective repeat (SREJ) option in V.42
on the PSTN link (if present in IWF). The command is not relevant for packet service.
Values: <Val>
0 Do not use SREJ
1 Use SREJ if available in remote DCE; continue without it if not
2 Use SREJ if available in remote DCE; disconnect if SREJ is not available
Syntax: Command syntax: AT+ESR=[<Val>]
Command Possible Responses
AT+ESR?
Note: Display the current setting.
+ESR: 0
OK
Note: Command is valid
AT+ESR=1
Note: Set value to 1.
OK
Note: Command is valid
- CDMA AT Commands 1
- Contents 3
- Chapter 1 – Introduction 9
- Terminology and Acronyms 10
- Chapter 2 – AT Command 13
- Features 13
- Attention AT 14
- Request IMSI +CIMI 15
- Capabilities List +GCAP 15
- Repeat Last Command A/ 15
- Phone Offline +CPOF 16
- Keypad Control +CKPD 17
- Clock Management +CCLK 17
- Ring Melody Playback +CRMP 17
- Ringer Sound Level +CRSL 18
- Subscriber Number +CNUM 18
- View Modem Timers +WTMR 19
- Chapter 4 – Call Control 20
- Hang-Up Command H 21
- Answer a Call A 22
- Remote Disconnection 22
- DTMF Signals +VTD, +VTS 23
- Automatic Answer S0 24
- Incoming Call Bearer +CICB 25
- Microphone Gain +VGT 26
- Volume Gain Control +VGR 26
- Echo Cancellation +ECHO 27
- TTY Mode +WTTY 28
- Chapter 5 – Network Service 29
- Band Preference +WBND 30
- Roam Preference +WRMP 31
- Change NAM Selection +WNAM 32
- Read Current NAM +WCNM 32
- Chapter 6 – SIM Card 35
- Operational Commands 35
- Enter PIN2 +CPIN2 36
- Change Password +CPWD 38
- Card Identification +CCID 38
- Chapter 7 – Short Messages 39
- Delete Message +CMGD 47
- Message Overwriting +WMGO 49
- Change SMS Status +WUSS 49
- Chapter 8 – Supplementary 51
- Services Commands 51
- Chapter 9 – Data Commands 55
- Cellular Result Codes +CRC 56
- Chapter 10 – V.24-V.25 58
- Set DCD Signal &C 59
- Set DTR Signal &D 60
- Set DSR Signal &S 60
- Back to Online Mode O 60
- Result Code Suppression Q 60
- DCE Response Format V 61
- Audio Loopback &T 61
- Echo E 61
- Save Configuration &W 62
- Chapter 11 – Phone Book 63
- Phonebook Read +CPBR 66
- Phonebook Search +CPBP 66
- Chapter 12 – Position 68
- Determination (GPS) 68
- IP Server Address +WMPC 73
- Chapter 13 - Specific AT 74
- Read GPIO Value +WIOR 78
- Write GPIO Value +WIOW 78
- Play Tone +WTONE 78
- Play DTMF Tone +WDTMF 79
- Hardware Version +WHWV 79
- Select Voice Gain +WSVG 80
- Status Request +WSTR 80
- Ring Indicator Mode +WRIM 81
- 32kHz Sleep Mode +W32K 81
- Software Version +WSSW 82
- CPHS Command +CPHS 83
- Reset +WRST 84
- Set Standard Tone +WSST 85
- Security PIN +WPIN 86
- Minute Alert +WMBP 87
- Chapter 14 - SIM ToolKit for 89
- RUIM Software Version 89
- Example: 91
- Chapter 15 – Provisioning AT 99
- Set IMSI +WIMI 100
- SID and NID +WSID 101
- Slot Cycle Index +WSCI 101
- Packet Dial String +WPDS 102
- Commit Changes +WCMT 104
- Read SID/NID Entries +WSNR 104
- Download PRL +DPRL 105
- Service Programming Example 106
- Chapter 16 – Extended AT 107
- Commands in IS707.3 107
- Select Pulse Dialing P 108
- Basic S-Registers S 108
- Error Control Report +ER 109
- Modulation Selection +MS 113
- V.18 Selection +MV18S 114
- Cellular Extension +CXT 115
- Configuration String +CFG 115
- Query Service +CAD 115
- Battery Charge +CBC 117
- Serving System +CSS 118
- Hang-up Voice +CHV 119
- Chapter 17 – Qualcomm 121
- Defined AT Commands for 121
- CDMA Operation 121
- Set DM Baud Rate $QCDMR 125
- SCRM’ing Selection $QCSCRM 126
- R-SCH IP Selection $QCMIP 127
- MIP Selection $QCMIPP 128
- Chapter 18 – TCP/IP App AT 133
- Commands 133
- Open Socket +WOSK 134
- Close Socket +WCSK 135
- Transmit Socket Data +WSTX 135
- Read Receive Data +WSRX 136
- Force Dormant Mode +WFDM 138
- IP Address Lookup +WDNS 139
- Display IP Address +WIPC 139
- PPP Session Status +WPPP 139
- Socket State Change +WSKS 140
- Received Socket Data +WSRX 141
- Socket Data Error +WSRE 141
- Chapter 19 – Reference 143
- Information 143
- Specific Error Result Codes 144
- Final Result Codes 145
- Intermediate Result Codes 145
- Parameters Storage 147
- TCP App Socket Status Events 150
- TCP App Socket Error Codes 150
- TCP App DNS Server Codes 150
- TCP App PPP Network Codes 150
- Phonebook UCS2 Unicode 152
- MuxLite Example 154
- Chapter 20 – Unsolicited AT 155
- Result Codes 155
- Key Press or Release +CKEV 156
- Mode Preference +COPS 158
- Incoming Call +CRING 158
- RxLev Indication +CSQ 159
- Incoming Call +RING 159
- Call Answered +WANS 159
- Call Connected +WCNT 160
- Call Ended +WEND 160
- Flash Indication +WFSH 161
- General Indicator +WIND 161
- Call Originated +WORG 162
- Roaming Indication +WROM 162
- Emergency Mode +WSOS 163
- Current NAM Change +WNAM 163
- Voice Mail Indicator +WVMI 164
- Power Save +WSPS 164
- Download PRL Status +DPRL 167
- Chapter 21 – AT Command 168
- Examples 168
- Incoming Voice Call 169
- Call Waiting 169
- Originate Data Call 169
- Originate Data Call Failure 169
- Short Message Examples 170
- GpsOne Examples 171
- AT Commands 175
- Read Message +CMGR 177
- List Message +CMGL 178
- Send Message +CMGS 179
- Facility Lock +CLCK 185
- Signal Quality +CSQ 185
- Boot URL +WBURL 187
- Trusted Domain +WTDMN 187
- Proxy Address +WDPXY 187
- IOTA Error +WOAE 188
- Please Retry +WOAR 188
- Display PRI Checksum +WSUM 189
Related products and manuals for Networking Multitech MTCBA-C-U
Networking Multitech ZDX Series User's Guide
(10 pages)
(10 pages)
Networking Multitech CF220 User's Guide
(12 pages)
(12 pages)
Networking Multitech MT5600ZDXV User Manual
(58 pages)
(58 pages)
Networking Multitech MT5634ZBAV User's Guide
(47 pages)
(47 pages)
Networking Multitech FR2201 User's Guide
(28 pages)
(28 pages)
Networking Multitech RF802EW User's Guide
(28 pages)
(28 pages)
Networking Multitech MA220 User's Guide
(80 pages)
(80 pages)
Networking Multitech MA100-1M User's Guide
(71 pages)
(71 pages)
Networking Multitech FF200 User's Guide
(169 pages)
(169 pages)
RCA M45 series podręczniki
Instrukcje obsługi i podręczniki użytkownika dla Odtwarzacze RCA M45 series.
Dostarczamy 1 pdf podręczników RCA M45 series do pobrania za darmo według typów dokumentów: Instrukcja Użytkownika
Rca M45 series Instrukcja Użytkownika (1 strony)
Marka: Rca | Kategoria: Players | Rozmiar: 0.26 MB |
Spis treści
Więcej produktów i instrukcji dla Odtwarzacze RCA
| Modele | Rodzaj dokumentu |
|---|---|
| M4001 |
Instrukcja Użytkownika
RCA M4001 User Manual,
30 strony
|
| 5588825C |
Instrukcja Użytkownika
RCA 5588825C User Manual,
39 strony
|
| M4002 |
Instrukcja Użytkownika
RCA M4002 User Manual,
30 strony
|
| MC4202 |
Instrukcja Użytkownika
RCA MC4202 User Manual,
88 strony
|
| RD1075SA |
Instrukcja Użytkownika
RCA RD1075SA User Manual,
10 strony
|
| RD2215 |
Instrukcja Użytkownika
RCA RD2215 User Manual,
23 strony
|
| MC4001 |
Instrukcja Użytkownika
RCA MC4001 User Manual,
30 strony
|
| 811-R50391W011 |
Instrukcja Użytkownika
RCA 811-R50391W011 User Manual,
2 strony
|
| RD2012 |
Instrukcja Użytkownika
RCA RD2012 User Manual,
39 strony
|
| 5567206A |
Instrukcja Użytkownika
RCA 5567206A User Manual,
10 strony
|
| RC130IPK |
Instrukcja Użytkownika
RCA RC130IPK User Manual,
3 strony
|
| Lyra2 RD 2209 |
Instrukcja Użytkownika
RCA Lyra2 RD 2209 User Manual,
32 strony
|
| H115 |
Instrukcja Użytkownika
RCA H115 User Manual,
38 strony
|
| MC43 Series |
Instrukcja Użytkownika
RCA MC43 Series Manuel d'utilisation,
2 strony
|
| M38 series |
Instrukcja Użytkownika
RCA M38 series User Manual,
1 strony
|
| SLC5016 |
Instrukcja Użytkownika
RCA SLC5016 User Manual,
87 strony
|
| SLC5008 |
Instrukcja Użytkownika
RCA SLC5008 User Manual,
87 strony
|
| RC65iBK |
Instrukcja Użytkownika
RCA RC65iBK User Manual,
2 strony
|
| X3000 |
Instrukcja Użytkownika
RCA X3000 User Manual,
33 strony
|
| S2204 |
Instrukcja Użytkownika
RCA S2204 User Manual,
33 strony
|
© 2020, manymanuals.com. All rights reserved. | 0.037 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals