EV-DO and CDMA AT Commands Reference Guide
CONTENTS AT Commands for EV-DO-EV3 Modems 10 Notes ...
CUSTOM AT COMMANDS AT Commands for EV-DO-EV3 Modems 100 Revision Identification #CGMR Execute command returns the manufacturer’s software revisio
CUSTOM AT COMMANDS 101 AT Commands for EV-DO-EV3 Modems Example AT#CIMI #CIMI: 310001114445555 OK Mobile Equipment Identifier #MEID Read command
CUSTOM AT COMMANDS AT Commands for EV-DO-EV3 Modems 102 Syntax Command Command type AT#Z=<profile> Set AT#Z=? Test Parameters and Values &
CUSTOM AT COMMANDS 103 AT Commands for EV-DO-EV3 Modems Query Temperature Overflow #QTEMP Read command queries the device internal temperature s
CUSTOM AT COMMANDS AT Commands for EV-DO-EV3 Modems 104 0 - Normal temperature 1 - Operating temperature upper bound, +55°C. 2 - Extreme tempera
CUSTOM AT COMMANDS 105 AT Commands for EV-DO-EV3 Modems General Purpose Input/Output Pin Control #GPIO Execute command sets the value of the gen
CUSTOM AT COMMANDS AT Commands for EV-DO-EV3 Modems 106 where: <dir> Current direction setting for the GPIO<pin>. <stat> Log
CUSTOM AT COMMANDS 107 AT Commands for EV-DO-EV3 Modems Parameters and Values <mode> Defines how the STAT_LED GPIO is handled. 0 GPIO tied
CUSTOM AT COMMANDS AT Commands for EV-DO-EV3 Modems 108 AT#SLED=3,5,5 OK AT#SLED? #SLED: 3,5,5 OK Save STAT_LED GPIO Setting #SLEDSAV Execute
CUSTOM AT COMMANDS 109 AT Commands for EV-DO-EV3 Modems #E2SMSRI: 0 OK AT#E2SMSRI=50 OK AT#E2SMSRI? #E2SMSRI: 50 OK Read Analog/Digital Converter
CONTENTS 11 AT Commands for EV-DO-EV3 Modems Syntax ...
CUSTOM AT COMMANDS AT Commands for EV-DO-EV3 Modems 110 Digital/Analog Converter Control #DAC EV3 models only. Set command enables/disables DAC_O
CUSTOM AT COMMANDS 111 AT Commands for EV-DO-EV3 Modems Auxiliary Voltage Output Control #VAUX Set command enables/disables the auxiliary voltag
CUSTOM AT COMMANDS AT Commands for EV-DO-EV3 Modems 112 #V24CFG: <pin1>,<mode1>[<CR><LF><CR><LF> #V24CFG: <p
CUSTOM AT COMMANDS 113 AT Commands for EV-DO-EV3 Modems Syntax Command Command type AT#V24=<pin>[,<state>] Set AT#V24? Read AT#V24=
CUSTOM AT COMMANDS AT Commands for EV-DO-EV3 Modems 114 ATD Dialing Mode #DIALMODE Set command sets dialing modality. Read command returns curre
CUSTOM AT COMMANDS 115 AT Commands for EV-DO-EV3 Modems Syntax Command Command type AT#ACAL=[<mode>] Set AT#ACAL? Read AT#ACAL=? Test Pa
CUSTOM AT COMMANDS AT Commands for EV-DO-EV3 Modems 116 Example AT#ACALEXT? #ACALEXT: (0,1),(0-9) Extended Call Monitoring #ECAM Execute command
CUSTOM AT COMMANDS 117 AT Commands for EV-DO-EV3 Modems SMS Overflow #SMOV Set command enables or disables the SMS overflow signaling function.
CUSTOM AT COMMANDS AT Commands for EV-DO-EV3 Modems 118 (new message received) +CMTI: "ME",1 #SMOV: "ME" Audio Codec #CODEC S
CUSTOM AT COMMANDS 119 AT Commands for EV-DO-EV3 Modems Example AT#NITZ=? OK AT#NITZ? #NITZ: "12/09/10,13:31:32" OK Skip Escape Sequ
CONTENTS AT Commands for EV-DO-EV3 Modems 12 E-mail Authentication Password #EPASSW ...
CUSTOM AT COMMANDS AT Commands for EV-DO-EV3 Modems 120 Parameters and Values <gt> 0 No guard time. Default: 0. 1…10 Guard time in second
CUSTOM AT COMMANDS 121 AT Commands for EV-DO-EV3 Modems Show Address #CGPADDR Execute command returns either the IP address for the current acti
CUSTOM AT COMMANDS AT Commands for EV-DO-EV3 Modems 122 Parameters and Values <x> RI enabling. 0 Disables RI pin response for URC message.
CUSTOM AT COMMANDS 123 AT Commands for EV-DO-EV3 Modems where: <PNn> - Value of nth (active/candidate/neighbor )pilot sets. <PNn_Str>
MULTISOCKET AT COMMANDS AT Commands for EV-DO-EV3 Modems 124 Multisocket AT Commands Note: For UIP devices, commands in this section apply only
MULTISOCKET AT COMMANDS 125 AT Commands for EV-DO-EV3 Modems Example AT#SS #SS: 1,3,91.80.90.162,61119,88.37.127.146,10510 #SS: 2,4,91.80.90.162,
MULTISOCKET AT COMMANDS AT Commands for EV-DO-EV3 Modems 126 Notes Issuing #SI<CR> causes getting information about data traffic of all th
MULTISOCKET AT COMMANDS 127 AT Commands for EV-DO-EV3 Modems Syntax Command Command type AT#SGACT=<cid>,<stat>[,<userId>,<pw
MULTISOCKET AT COMMANDS AT Commands for EV-DO-EV3 Modems 128 Socket Configuration #SCFG Set command sets the socket configuration parameters. Rea
MULTISOCKET AT COMMANDS 129 AT Commands for EV-DO-EV3 Modems Notes Values are saved in the non-volatile memory automatically. You must set t
CONTENTS 13 AT Commands for EV-DO-EV3 Modems Data Inactivity Timer +CTA ...
MULTISOCKET AT COMMANDS AT Commands for EV-DO-EV3 Modems 130 Socket Configuration Extended #SCFGEXT Set command sets the socket configuration ext
MULTISOCKET AT COMMANDS 131 AT Commands for EV-DO-EV3 Modems Notes These values are automatically saved in non-volatile memory. Keepalive is
MULTISOCKET AT COMMANDS AT Commands for EV-DO-EV3 Modems 132 <lPort> UDP connections local port. 1-65535 <connMode> Connection mode
MULTISOCKET AT COMMANDS 133 AT Commands for EV-DO-EV3 Modems Parameters and Values <connID> Socket connection identifier. 1-6 Socket List
MULTISOCKET AT COMMANDS AT Commands for EV-DO-EV3 Modems 134 Example AT#SL=? #SL: (1-6),(0,1),(1-65535),(0,255) OK Next command opens a socket lis
MULTISOCKET AT COMMANDS 135 AT Commands for EV-DO-EV3 Modems Example AT#SLUDP=? #SLUDP: (1-6),(0,1),(1-65535) OK Next command opens a socket list
MULTISOCKET AT COMMANDS AT Commands for EV-DO-EV3 Modems 136 Syntax Command Command type AT#SRECV=<connID>,<maxByte> Execute AT#SRECV
MULTISOCKET AT COMMANDS 137 AT Commands for EV-DO-EV3 Modems Parameters and Values <connID> Socket connection identifier. 1-6 The device r
MULTISOCKET AT COMMANDS AT Commands for EV-DO-EV3 Modems 138 Notes You can use #SSENDEXT if #SD or #SL opened the connection. All special ch
SINGLE SOCKET AT COMMANDS 139 AT Commands for EV-DO-EV3 Modems Single Socket AT Commands Socket Parameters Reset #SKTRST Execute command resets
CONTENTS AT Commands for EV-DO-EV3 Modems 14 Digital Voice Interface ...
FTP AT COMMANDS AT Commands for EV-DO-EV3 Modems 140 FTP AT Commands FTP Timeout #FTPTO Set command sets the timeout used when opening either the
FTP AT COMMANDS 141 AT Commands for EV-DO-EV3 Modems FTP Close #FTPCLOSE Execute command closes an FTP connection. Test command returns the OK r
FTP AT COMMANDS AT Commands for EV-DO-EV3 Modems 142 Notes The Execute command causes an ERROR result code to be returned if no FTP connection i
FTP AT COMMANDS 143 AT Commands for EV-DO-EV3 Modems FTP Delete #FTPDELE Execute command, issued during an FTP connection, deletes a file from t
FTP AT COMMANDS AT Commands for EV-DO-EV3 Modems 144 Notes The Execute command causes an ERROR result code if no FTP connection is open. FTP Li
ENHANCED IP STACK AT COMMANDS 145 AT Commands for EV-DO-EV3 Modems Enhanced IP Stack Extension AT Commands Query DNS #QDNS Execute command exec
ENHANCED IP STACK AT COMMANDS AT Commands for EV-DO-EV3 Modems 146 where: <hostnn> Hostname, string type. <IPaddrn> IP address, strin
ENHANCED IP STACK AT COMMANDS 147 AT Commands for EV-DO-EV3 Modems Test command reports the supported range of values for the <cid> paramete
ENHANCED IP STACK AT COMMANDS AT Commands for EV-DO-EV3 Modems 148 Parameters and Values <n> Enable or disable RI. 0 RI disabled for Socket
ENHANCED IP STACK AT COMMANDS 149 AT Commands for EV-DO-EV3 Modems Notes For outgoing connections made with #SD the remote host is dynamically
CONTENTS 15 AT Commands for EV-DO-EV3 Modems Syntax ...
ENHANCED IP STACK AT COMMANDS AT Commands for EV-DO-EV3 Modems 150 Notes Last data session counters are not saved in non-volatile memory so they
ENHANCED IP STACK AT COMMANDS 151 AT Commands for EV-DO-EV3 Modems Parameters and Values <IPaddr> String type. Address of the remote host.
ENHANCED IP STACK AT COMMANDS AT Commands for EV-DO-EV3 Modems 152 Syntax Command Command type AT#TCPMAXDAT=<size> Set AT#TCPMAXDAT? Read
ENHANCED IP STACK AT COMMANDS 153 AT Commands for EV-DO-EV3 Modems E-mail Management AT Commands E-mail SMTP Server #ESMTP Set command sets the
ENHANCED IP STACK AT COMMANDS AT Commands for EV-DO-EV3 Modems 154 Syntax Command Command type AT#EADDR=[<e-add>] Set AT#EADDR? Read AT#EA
ENHANCED IP STACK AT COMMANDS 155 AT Commands for EV-DO-EV3 Modems Example AT#EUSER="myE-Name" OK AT#EUSER? #EUSER: "myE-Name"
ENHANCED IP STACK AT COMMANDS AT Commands for EV-DO-EV3 Modems 156 Parameters and Values <da> String type, destination address. <subj>
ENHANCED IP STACK AT COMMANDS 157 AT Commands for EV-DO-EV3 Modems Parameters and Values <mode> CDMA context activation mode. 0 CDMA conte
ENHANCED IP STACK AT COMMANDS AT Commands for EV-DO-EV3 Modems 158 Example AT#EMAILD=”[email protected]”,”subject of the mail” >message body… thi
ENHANCED IP STACK AT COMMANDS 159 AT Commands for EV-DO-EV3 Modems SMTP Read Message #EMAILMSG Execute command returns the last response from SM
CONTENTS AT Commands for EV-DO-EV3 Modems 16 Syntax ...
GPS AT COMMANDS SET AT Commands for EV-DO-EV3 Modems 160 GPS AT Commands Set This section applies to MTPCIE-EV3 GPS-capable models only. GPS Antenn
GPS AT COMMANDS SET 161 AT Commands for EV-DO-EV3 Modems Values <status> 0 GPS controller is powered down. Default: 0. 1 GPS controller
GPS AT COMMANDS SET AT Commands for EV-DO-EV3 Modems 162 Unsolicited NMEA Data Configuration $GPSNMUN Set command permits activation of unsolicit
GPS AT COMMANDS SET 163 AT Commands for EV-DO-EV3 Modems AT$GPSNMUN=1,0,0,1,0,0,0 OK Turn-off the unsolicited mode: AT$GPSNMUN=0 OK Read c
GPS AT COMMANDS SET AT Commands for EV-DO-EV3 Modems 164 Parameters and Values This section describes the information displayed when you use the Ex
GPS AT COMMANDS SET 165 AT Commands for EV-DO-EV3 Modems Example AT$GPSACP $GPSACP:080220.479,4542.82691N,01344.26820E,259.07,3,2.1,0.1,0.0,0.0,27
GPS AT COMMANDS SET AT Commands for EV-DO-EV3 Modems 166 gpsOne Commands Clear GPS Data $GPSCLRX Execute command resets all GPS related paramete
GPS AT COMMANDS SET 167 AT Commands for EV-DO-EV3 Modems Parameters and Values <mode> 0 GPS Unlock. 1 Mobile initiated call is locked. 2
AUDIO COMMANDS AT Commands for EV-DO-EV3 Modems 168 CDMA Custom AT Commands General Configuration AT Commands Common Air Interface Parameters #C
AUDIO COMMANDS 169 AT Commands for EV-DO-EV3 Modems <voice_priv> Current voice privacy mode integer value. 0 Disable. 1 Enable. <band&
CONTENTS 17 AT Commands for EV-DO-EV3 Modems Syntax ...
AUDIO COMMANDS AT Commands for EV-DO-EV3 Modems 170 <deepsleep> Current deep sleep status. 0 Wake up. 1 Deep sleep. Syntax Command Comma
AUDIO COMMANDS 171 AT Commands for EV-DO-EV3 Modems OK AT#MODEM=9? #MODEM: CE910-DUAL OK Modem NAM Parameters #ENG Set command sets to mobil
AUDIO COMMANDS AT Commands for EV-DO-EV3 Modems 172 2 Mobile network code. 3 Access overload control. 4 MOB_TERM_HOME registration flag. 5 MOB
AUDIO COMMANDS 173 AT Commands for EV-DO-EV3 Modems Syntax Command Command type AT#MODE=[=<mode>]? Set AT#MODE? Read AT#MODE=? Test Para
AUDIO COMMANDS AT Commands for EV-DO-EV3 Modems 174 Syntax Command Command type AT#NOTI= <index>,<onoff> Set AT#NOTI? Read AT#NOTI=?
AUDIO COMMANDS 175 AT Commands for EV-DO-EV3 Modems Example AT#NOTI=? #NOTI: (0-18),(0,1) OK AT#NOTI? #NOTI: 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
AUDIO COMMANDS AT Commands for EV-DO-EV3 Modems 176 Example AT$MDN=? OK AT$MDN? $MDN: 1234567890 Mobile Station ID $MSID Set command manipulate
AUDIO COMMANDS 177 AT Commands for EV-DO-EV3 Modems Notification of Service +SERVICE Read command returns notification of service area without
AUDIO COMMANDS AT Commands for EV-DO-EV3 Modems 178 Reverse Logistic Support #RTN Execute command restores the selected parameter’s factory valu
AUDIO COMMANDS 179 AT Commands for EV-DO-EV3 Modems Vocoder Setting Value Reading or Writing #PREFVOC Set command sets vcoder setting value. Re
CONTENTS AT Commands for EV-DO-EV3 Modems 18 CMS Error List ...
AUDIO COMMANDS AT Commands for EV-DO-EV3 Modems 180 #PREFVOC: 0,32768,32768,32768 OK Configuration Setting +CFG Set command sets a module c
AUDIO COMMANDS 181 AT Commands for EV-DO-EV3 Modems RM Interface Setting +CRM Set command changes the RM interface protocol. Read command retur
AUDIO COMMANDS AT Commands for EV-DO-EV3 Modems 182 +CRM: 0 OK AT$QCMIP=2 OK AT+CRM? +CRM: 2 OK Data Session AT Commands Data Inactivity Timer +
AUDIO COMMANDS 183 AT Commands for EV-DO-EV3 Modems Example AT+CTA=? +CTA: (0-255) OK AT+CTA? +CTA: 60 OK AT+CTA=30 OK AT+CTA? +CTA: 30 OK Packet
AUDIO COMMANDS AT Commands for EV-DO-EV3 Modems 184 Syntax Command Command type AT$GODORMANT Execute AT$GODORMANT=? Test Example AT$GODORMANT O
AUDIO COMMANDS 185 AT Commands for EV-DO-EV3 Modems EVDO Specific AT Commands RX Diversity for CDMA #CRXD EV3 models only. Set command enables o
AUDIO COMMANDS AT Commands for EV-DO-EV3 Modems 186 5 Connected. <SMP state> 0 Inactivity state. 1 AMP setup state. 2 AT initialize sta
AUDIO COMMANDS 187 AT Commands for EV-DO-EV3 Modems 2 UATI (Unicast). 3 RATI (Random). <ATI value> Hex value of current ATI. <Color co
AUDIO COMMANDS AT Commands for EV-DO-EV3 Modems 188 Audio Commands Change Audio Path #CAP C2 models only. Set command switches the active audio p
AUDIO COMMANDS 189 AT Commands for EV-DO-EV3 Modems Parameters and Values <mode> Ringing tone. 0 Disables open audio path. Default: 0. 1
INTRODUCTION 19 AT Commands for EV-DO-EV3 Modems Introduction This guide describes the AT commands: V.250 general AT command set, in order to m
AUDIO COMMANDS AT Commands for EV-DO-EV3 Modems 190 Select Ringer Path #SRP C2 models only. Set command selects the ringer path to whom the sendin
AUDIO COMMANDS 191 AT Commands for EV-DO-EV3 Modems Parameters and Values <mode> Signaling tones status. 0 Signaling tones disabled. 1 Si
AUDIO COMMANDS AT Commands for EV-DO-EV3 Modems 192 Example AT#TONE=? #TONE: (0-9,#,*,A-D,G-L,Y,Z),(1-300) OK AT#TONE=3,60 OK AT#TONE=3 OK Tone Cla
AUDIO COMMANDS 193 AT Commands for EV-DO-EV3 Modems Notes No information is returned for class 128. Example AT#TSVOL=84,1,5 OK AT#TSVOL=84,0 OK
AUDIO COMMANDS AT Commands for EV-DO-EV3 Modems 194 Example DVI activated for audio. DVI is configured as master providing on DVI Port #2: AT#DVI=1
AUDIO COMMANDS 195 AT Commands for EV-DO-EV3 Modems Handsfree Echo Canceller #SHFEC C2 models only. Set command enables/disables the echo cancell
AUDIO COMMANDS AT Commands for EV-DO-EV3 Modems 196 Handset Microphone Gain #HSMICG C2 models only. Set command sets the handset microphone input
AUDIO COMMANDS 197 AT Commands for EV-DO-EV3 Modems Handset Sidetone #SHSSD Set command enables or disables the sidetone on handset audio output
AUDIO COMMANDS AT Commands for EV-DO-EV3 Modems 198 Handsfree Receiver Gain #HFRECG C2 models only. Set command sets the handsfree analog output g
AUDIO COMMANDS 199 AT Commands for EV-DO-EV3 Modems Audio Profiles Audio Profile Factory Configuration #PRST Execute command resets the actual a
COPYRIGHT AND TECHNICAL AT Commands for EV-DO-EV3 Modems 2 EV3/C2 AT Commands Reference Guide for the following products: MTSMC-EV3-xx, MTD-EV3-x
INTRODUCTION AT Commands for EV-DO-EV3 Modems 20 Note: Issuing the Read command (trailing ?) causes the command to be executed. Whether or not t
AUDIO COMMANDS AT Commands for EV-DO-EV3 Modems 200 Audio Profile Configuration Save #PSAV Execute command saves the actual audio parameters in t
AUDIO COMMANDS 201 AT Commands for EV-DO-EV3 Modems Parameters and Values <prof> Current profile. 0 Standard profile. 1-3 Extended profil
AUDIO COMMANDS AT Commands for EV-DO-EV3 Modems 202 <add_atten> 0-90 AGC additional attenuation (unused). <min_atten> 0-90 AGC m
AUDIO COMMANDS 203 AT Commands for EV-DO-EV3 Modems Handsfree Noise Reduction #SHFNR Set command enables/disables the noise reduction function o
AUDIO COMMANDS AT Commands for EV-DO-EV3 Modems 204 Handset Automatic Gain Control #SHSAGC Set command enables or disables the automatic gain con
AUDIO COMMANDS 205 AT Commands for EV-DO-EV3 Modems Digital Voice Interface Digital Voiceband Interface #DVI Set command enables or disables the
AUDIO COMMANDS AT Commands for EV-DO-EV3 Modems 206 Syntax Command Command type AT#TTY=<support> Set AT#TTY? Read AT#TTY=? Test Parameter
AUDIO COMMANDS 207 AT Commands for EV-DO-EV3 Modems Syntax Command Command type AT#PCMRXG=<RX_VOL> Set AT#PCMRXG? Read AT#PCMRXG=? Test
AUDIO COMMANDS AT Commands for EV-DO-EV3 Modems 208 <agc_compr_thres> Compression threshold. This is the input energy threshold above which
AUDIO COMMANDS 209 AT Commands for EV-DO-EV3 Modems Notes These values are automatically saved in non-volatile memory. Examples AT#SHSAGCRX? #S
INTRODUCTION 21 AT Commands for EV-DO-EV3 Modems If command V1 is enabled (verbose responses codes) and all commands in a command line performe
AUDIO COMMANDS AT Commands for EV-DO-EV3 Modems 210 <agc_compr_thres> Compression threshold. This is the input energy threshold above which
AUDIO COMMANDS 211 AT Commands for EV-DO-EV3 Modems <agc_exp_thres> Expansion threshold. This is the input energy threshold under which exp
AUDIO COMMANDS AT Commands for EV-DO-EV3 Modems 212 Example #SRXAGC: 0 OK AT#SRXAGC=? #SRXAGC: (0,1) OK AT#SRXAGC=1 OK Handsfree TX Filter Coeffici
AUDIO COMMANDS 213 AT Commands for EV-DO-EV3 Modems AT#SHSFTX=FFFF,0,0,0,0,0,0 OK AT#SHSFTX? #SHSFTX: FFFF,0,0,0,0,0,0 Handset TX Filter Coefficie
VERIZON SPECIFIC AT COMMANDS AT Commands for EV-DO-EV3 Modems 214 Verizon Specific AT Commands MEID & ESN #MEIDESN Read command returns the mo
VERIZON SPECIFIC AT COMMANDS 215 AT Commands for EV-DO-EV3 Modems Syntax Command Command type AT#ALERTSND=[<index>,<onoff>…] Execute
VERIZON SPECIFIC AT COMMANDS AT Commands for EV-DO-EV3 Modems 216 OK AT#ALERTSND=2,1 OK AT#ALERTSND=5,1 OK AT#ALERTSND? #ALERTSND: 0,1,0,0,1 OK AT#
VERIZON SPECIFIC AT COMMANDS 217 AT Commands for EV-DO-EV3 Modems NAM Lock #NAMLOCK Execute command enables and disables the device’s current NAM
VERIZON SPECIFIC AT COMMANDS AT Commands for EV-DO-EV3 Modems 218 Parameters and Values <index> Message index. If the indicated index cont
VERIZON SPECIFIC AT COMMANDS 219 AT Commands for EV-DO-EV3 Modems Example AT+CMGF=1 OK AT+VCMGR=2 +VCMGR: "REC READ","",011123
INTRODUCTION AT Commands for EV-DO-EV3 Modems 22 Command Response Timeout If response codes are enabled, which is the default setting, then every c
VERIZON SPECIFIC AT COMMANDS AT Commands for EV-DO-EV3 Modems 220 <callback> - Callback number. <date> - Received date in form as "
VERIZON SPECIFIC AT COMMANDS 221 AT Commands for EV-DO-EV3 Modems SMS Mobile Origination #SMSMOEN Execute command sends Mobile Originated SMS Mess
VERIZON SPECIFIC AT COMMANDS AT Commands for EV-DO-EV3 Modems 222 Parameters and Values <n> Service option. 0 Service option by default val
VERIZON SPECIFIC AT COMMANDS 223 AT Commands for EV-DO-EV3 Modems Example AT#SMSPSIZ=? #SMSPSIZ: (0-220) OK AT#SMSPSIZ? #SMSPSIZ: 160 OK AT#SMSPSI
VERIZON SPECIFIC AT COMMANDS AT Commands for EV-DO-EV3 Modems 224 Preferred Roaming List $PRL Read command returns the current device PRL ID <i
VERIZON SPECIFIC AT COMMANDS 225 AT Commands for EV-DO-EV3 Modems Example AT#BANDCLS? #BANDCLS: BC0,(BC0,BC1) OK Set Default Band #DEFAULTBAND
VERIZON SPECIFIC AT COMMANDS AT Commands for EV-DO-EV3 Modems 226 Clear MRU Table #CLRMRU Execute command clears the Most Recently Used (MRU) tabl
VERIZON SPECIFIC AT COMMANDS 227 AT Commands for EV-DO-EV3 Modems 7 Loss of Service. If <ind_id>=0-2, <alert_id>=2. If mobile status
VERIZON SPECIFIC AT COMMANDS AT Commands for EV-DO-EV3 Modems 228 Syntax Command Command type AT#ERIDATA? Read AT#ERIDATA=? Test Example AT#ERID
MOBILE IP COMMANDS 229 AT Commands for EV-DO-EV3 Modems Mobile IP Commands Network Access Identifier $QCMIPNAI Set command sets the network acces
INTRODUCTION 23 AT Commands for EV-DO-EV3 Modems Command Estimated maximum time to get response (Seconds) #SEMAIL 210 ( context activation + DNS
MOBILE IP COMMANDS AT Commands for EV-DO-EV3 Modems 230 Primary Home Agent Address $QCMIPPHA Set command sets the primary home agent address. Read
MOBILE IP COMMANDS 231 AT Commands for EV-DO-EV3 Modems Secondary Home Agent Address $QCMIPSHA Set command sets the secondary home agent address.
MOBILE IP COMMANDS AT Commands for EV-DO-EV3 Modems 232 Home Address $QCMIPHA Set command sets the primary home agent address. Read command return
MOBILE IP COMMANDS 233 AT Commands for EV-DO-EV3 Modems Home Agent Shared Secret $QCMIPMHSSX Set command sets the MIP password. Read command retu
MOBILE IP COMMANDS AT Commands for EV-DO-EV3 Modems 234 AAA Server Shared Secret $QCMIPMASSX Set command sets the MIP AAA server security password
MOBILE IP COMMANDS 235 AT Commands for EV-DO-EV3 Modems Home Agent Security Parameter Index $QCMIPMHSPI Set command sets the MIP security paramet
MOBILE IP COMMANDS AT Commands for EV-DO-EV3 Modems 236 AAA Server Security Parameter Index $QCMIPMASPI Set command sets the MIP AAA server securi
MOBILE IP COMMANDS 237 AT Commands for EV-DO-EV3 Modems Reverse Tunneling Preference $QCMIPRT Set command sets the reverse tunnelling preference.
MOBILE IP COMMANDS AT Commands for EV-DO-EV3 Modems 238 Enable/Disable Mobile IP $QCMIP Set command enables and disables mobile IP. Read command r
MOBILE IP COMMANDS 239 AT Commands for EV-DO-EV3 Modems AT$QCMIP=1 OK AT$QCMIP? $QCMIP: 1 OK Active MIP Profile Selection $QCMIPP Set command sel
INTRODUCTION AT Commands for EV-DO-EV3 Modems 24 Commands &Y and &P are both used to set the profile to be loaded at startup. &Y instru
MOBILE IP COMMANDS AT Commands for EV-DO-EV3 Modems 240 Syntax Command Command type AT$QCMIPEP=<n> Execute AT$QCMPEP? Read AT$QCMPEP=? Te
MOBILE IP COMMANDS 241 AT Commands for EV-DO-EV3 Modems Parameters and Values <n> Profile number, 0-5. Example AT$QCMIPGETP=? $QCMIPGETP: (
MOBILE IP COMMANDS AT Commands for EV-DO-EV3 Modems 242 Parameters and Values <val> Shared secret data. Maximum size is 16 bytes. Double qu
MOBILE IP COMMANDS 243 AT Commands for EV-DO-EV3 Modems Note If the value provisioned is not committed to non-volatile memory, temporary values
MOBILE IP COMMANDS AT Commands for EV-DO-EV3 Modems 244 Example AT$QCMDR=? $QCMDR: (0-3) OK AT$QCMDRr? $QCMDR: 3 OK AT$QCMDR=3 OK
245 AT Commands for EV-DO-EV3 Modems AT Parser Abort The following AT Command list can be aborted, while executing the AT Command: ATD ATA
AT Commands for EV-DO-EV3 Modems 246 CME Error List Mobile Equipment (ME) Error Result Code - +CME ERROR: <err> +CME ERROR: <err> is NOT
CMS ERROR LIST 247 AT Commands for EV-DO-EV3 Modems CMS Error List Message Service Failure Result Code - +CMS ERROR: <err> This is not a
CMS ERROR LIST AT Commands for EV-DO-EV3 Modems 248 63 SMS delivery postponed more last. Radio Interface Problems 64 Radio if resource shortage.
ACRONYMS 249 AT Commands for EV-DO-EV3 Modems Acronyms AT Attention command BA BCCH Allocation BCCH Broadcast Control Channel CA Cell Allocati
INTRODUCTION 25 AT Commands for EV-DO-EV3 Modems #DIALMODE #CODEC #SCFG #SHSFTX #SRXAGC #SHSAGCTX #SHSAGCRX #DNS #TCPMAXDAT #TCPREASS #TTY
FORMAT FOR ENTERING AT COMMANDS AT Commands for EV-DO-EV3 Modems 26 Format for Entering AT Commands This chapter describes the general format you m
GENERAL CONFIGURATION COMMANDS 27 AT Commands for EV-DO-EV3 Modems General Configuration Commands Set Notification Port #NOPT Execute command se
GENERAL CONFIGURATION COMMANDS AT Commands for EV-DO-EV3 Modems 28 Hardware Revision #HWREV Execute command returns the device hardware revision
V.250 AT COMMANDS 29 AT Commands for EV-DO-EV3 Modems V.250 AT Commands Generic Modem Control Set to Factory-Defined Configuration &F Execut
CONTENTS 3 AT Commands for EV-DO-EV3 Modems Contents Introduction ...
V.250 AT COMMANDS AT Commands for EV-DO-EV3 Modems 30 Select Active Service Class +FCLASS Set command sets the wireless module in specified conne
V.250 AT COMMANDS 31 AT Commands for EV-DO-EV3 Modems Parameters and Values <n> 0-1 Profile number. The wireless module can store 2 full
V.250 AT COMMANDS AT Commands for EV-DO-EV3 Modems 32 Display Stored Numbers &N Execute command returns the telephone number stored at the &l
V.250 AT COMMANDS 33 AT Commands for EV-DO-EV3 Modems Notes Reference: V.25ter. Response indicates: +CIS707-A: IS-707-A (High Speed Packe
V.250 AT COMMANDS AT Commands for EV-DO-EV3 Modems 34 Notes This command is the same as &V. The row of information about CTS (C106) OPTIO
V.250 AT COMMANDS 35 AT Commands for EV-DO-EV3 Modems Single Line Connect Message \V Execute command set single line connect message. Syntax Com
V.250 AT COMMANDS AT Commands for EV-DO-EV3 Modems 36 Notes If parameter is omitted, the command has the same behavior as ATE0. Reference: V.
V.250 AT COMMANDS 37 AT Commands for EV-DO-EV3 Modems Notes The <text> portion of information responses is not affected by this setting.
V.250 AT COMMANDS AT Commands for EV-DO-EV3 Modems 38 Data Carrier Detect (DCD) Control &C Set command controls the RS232 DCD output behavior
V.250 AT COMMANDS 39 AT Commands for EV-DO-EV3 Modems Flow Control &K Set command controls the RS232 flow control behavior. Syntax Command
CONTENTS AT Commands for EV-DO-EV3 Modems 4 Revision Identification +GMR ...
V.250 AT COMMANDS AT Commands for EV-DO-EV3 Modems 40 Data Set Ready (DSR) Control &S Set command controls the RS232 DSR pin behavior. Syntax
V.250 AT COMMANDS 41 AT Commands for EV-DO-EV3 Modems Syntax Command Command type AT+IPR=<rate> Set AT+IPR? Read AT+IPR=? Test Parameter
V.250 AT COMMANDS AT Commands for EV-DO-EV3 Modems 42 Syntax Command Command type AT+IFC=<by_te>,<by_ta> Set AT+IFC? Read AT+IFC=?
V.250 AT COMMANDS 43 AT Commands for EV-DO-EV3 Modems DTE – Modem Character Framing +ICF Set command defines the asynchronous character framing
V.250 AT COMMANDS AT Commands for EV-DO-EV3 Modems 44 ATD><n>[;] Issues a call to phone number in entry location <n> of the active
V.250 AT COMMANDS 45 AT Commands for EV-DO-EV3 Modems Disconnect H Execute command closes the current conversation (voice or data). Syntax Comma
V.250 AT COMMANDS AT Commands for EV-DO-EV3 Modems 46 Tips for Selecting and Setting S-Parameters ATSn<CR> selects n as current paramet
V.250 AT COMMANDS 47 AT Commands for EV-DO-EV3 Modems Escape Character S2 Set command sets the ASCII character to be used as escape character. R
V.250 AT COMMANDS AT Commands for EV-DO-EV3 Modems 48 Read command returns the current value of S4 parameter. The format of the numbers in output i
V.250 AT COMMANDS 49 AT Commands for EV-DO-EV3 Modems Syntax Command Command type ATS7=[<tout>] Set ATS7? Read Parameters and Values <
CONTENTS 5 AT Commands for EV-DO-EV3 Modems Escape Character S2 ...
V.250 AT COMMANDS AT Commands for EV-DO-EV3 Modems 50 Syntax Command Command type ATS25=[<time>] Set ATS25? Read Parameters and Values <
V.250 AT COMMANDS 51 AT Commands for EV-DO-EV3 Modems 3 Error control optional; if error control can not be established, change data rate to matc
3GPP TS 27.007 AT COMMANDS AT Commands for EV-DO-EV3 Modems 52 3GPP TS 27.007 AT Commands General Request Manufacturer Identification +CGMI Execu
3GPP TS 27.007 AT COMMANDS 53 AT Commands for EV-DO-EV3 Modems Request Product Serial Number Identification +CGSN Execute command returns the mo
3GPP TS 27.007 AT COMMANDS AT Commands for EV-DO-EV3 Modems 54 Multiplexing Mode +CMUX Set command +CMUX enables or disables the 3GPP TS 07.010 m
3GPP TS 27.007 AT COMMANDS 55 AT Commands for EV-DO-EV3 Modems Call Control Hang Up Call +CHUP Execute command cancels all active and held calls
3GPP TS 27.007 AT COMMANDS AT Commands for EV-DO-EV3 Modems 56 Syntax Command Command type AT+CRC=[<mode>] Set AT+CRC? Read AT+CRC=? Test
3GPP TS 27.007 AT COMMANDS 57 AT Commands for EV-DO-EV3 Modems Network Service Handling Subscriber Number +CNUM Execute command returns the MSIS
3GPP TS 27.007 AT COMMANDS AT Commands for EV-DO-EV3 Modems 58 Notes CDMA operators are confidential and will not be listed. The module support
3GPP TS 27.007 AT COMMANDS 59 AT Commands for EV-DO-EV3 Modems Calling Line Identification Presentation +CLIP Set command enables or disables th
CONTENTS AT Commands for EV-DO-EV3 Modems 6 Syntax ...
3GPP TS 27.007 AT COMMANDS AT Commands for EV-DO-EV3 Modems 60 <CLI_validity> 0 - CLI valid. 1 - CLI withheld by the originator. 2 - CLI is n
3GPP TS 27.007 AT COMMANDS 61 AT Commands for EV-DO-EV3 Modems Call Holding Services +CHLD Execute command controls the network call hold servic
3GPP TS 27.007 AT COMMANDS AT Commands for EV-DO-EV3 Modems 62 <number> String type, phone number in format specified by <type>. <t
3GPP TS 27.007 AT COMMANDS 63 AT Commands for EV-DO-EV3 Modems Example ATD03282131321; OK AT+CPAS +CPAS: 4 A call is in progress. OK ATH OK Set Ph
3GPP TS 27.007 AT COMMANDS AT Commands for EV-DO-EV3 Modems 64 Until the DTR line is ON, the module does not return back in the power saving con
3GPP TS 27.007 AT COMMANDS 65 AT Commands for EV-DO-EV3 Modems Select Phonebook Memory Storage +CPBS Set command selects phonebook memory storag
3GPP TS 27.007 AT COMMANDS AT Commands for EV-DO-EV3 Modems 66 Syntax Command Command type AT+CPBR=<index1>[,<index2>] Execute AT+CPB
3GPP TS 27.007 AT COMMANDS 67 AT Commands for EV-DO-EV3 Modems Find Phonebook Entries +CPBF Execute command returns phonebook entries (from the
3GPP TS 27.007 AT COMMANDS AT Commands for EV-DO-EV3 Modems 68 Write Phonebook Entry +CPBW Execute command writes phonebook entry in location num
3GPP TS 27.007 AT COMMANDS 69 AT Commands for EV-DO-EV3 Modems Clock Management +CCLK Set command sets the real-time clock of the ME. Read comma
CONTENTS 7 AT Commands for EV-DO-EV3 Modems General Configuration AT Commands ...
3GPP TS 27.007 AT COMMANDS AT Commands for EV-DO-EV3 Modems 70 Alarm Management +CALA Set command stores in the internal Real Time Clock an alarm
3GPP TS 27.007 AT COMMANDS 71 AT Commands for EV-DO-EV3 Modems 3 The module wakes up in "alarm mode" if at the alarm time it was off, o
3GPP TS 27.007 AT COMMANDS AT Commands for EV-DO-EV3 Modems 72 Delete Alarm +CALD Execute command deletes an alarm in the ME. Test command report
3GPP TS 27.007 AT COMMANDS 73 AT Commands for EV-DO-EV3 Modems Ringer Sound Level +CRSL Set command selects the incoming call ringer sound level
3GPP TS 27.007 AT COMMANDS AT Commands for EV-DO-EV3 Modems 74 Notes Reference: 3GPP TS 27.007. Available AT Commands +CLAC Execute command ca
3GPP TS 27.007 AT COMMANDS 75 AT Commands for EV-DO-EV3 Modems Parameters and Values <n> Enable flag. 0 Disable +CME ERROR:<err> rep
3GPP TS 27.007 AT COMMANDS AT Commands for EV-DO-EV3 Modems 76 Tone Duration +VTD Set command sets the length of tones transmitted with +VTS comm
3GPP TS 27.005 AT COMMANDS FOR SMS AND CBS 77 AT Commands for EV-DO-EV3 Modems 3GPP TS 27.005 AT Commands for SMS and CBS General Configuration Se
3GPP TS 27.005 AT COMMANDS FOR SMS AND CBS AT Commands for EV-DO-EV3 Modems 78 Notes Cell Broadcast Service (CBS) is controlled by <bm>.
3GPP TS 27.005 AT COMMANDS FOR SMS AND CBS 79 AT Commands for EV-DO-EV3 Modems Parameters and Values <memr> Memory from which messages are
CONTENTS AT Commands for EV-DO-EV3 Modems 8 Cell Monitor #MONI ...
3GPP TS 27.005 AT COMMANDS FOR SMS AND CBS AT Commands for EV-DO-EV3 Modems 80 Message Configuration Set Text Mode Parameters +CSMP Set command s
3GPP TS 27.005 AT COMMANDS FOR SMS AND CBS 81 AT Commands for EV-DO-EV3 Modems Example AT+CSMP=? OK AT+CSMP? +CSMP: ,4098,0,0 OK AT+CSMP="123
3GPP TS 27.005 AT COMMANDS FOR SMS AND CBS AT Commands for EV-DO-EV3 Modems 82 TEST MESSAGE +CMGL: 2,"STO SENT","0123456789",&q
3GPP TS 27.005 AT COMMANDS FOR SMS AND CBS 83 AT Commands for EV-DO-EV3 Modems Example AT+CSAS=? +CSAS: (0,1) OK AT+CSAS OK AT+CSAS=1 OK AT+CSAS=0
3GPP TS 27.005 AT COMMANDS FOR SMS AND CBS AT Commands for EV-DO-EV3 Modems 84 Message Receiving and Reading New Message Indications +CNMI Set co
3GPP TS 27.005 AT COMMANDS FOR SMS AND CBS 85 AT Commands for EV-DO-EV3 Modems For Verizon: 0 - Normal (factory default) 1 - High <enc_typ
3GPP TS 27.005 AT COMMANDS FOR SMS AND CBS AT Commands for EV-DO-EV3 Modems 86 List Messages +CMGL Execute command reports the list of all the me
3GPP TS 27.005 AT COMMANDS FOR SMS AND CBS 87 AT Commands for EV-DO-EV3 Modems If a message written to storage present (See +CMGW), it displays i
3GPP TS 27.005 AT COMMANDS FOR SMS AND CBS AT Commands for EV-DO-EV3 Modems 88 +CMGL: 1,2,"",28 06801642423127068068226350541002000212DB9
3GPP TS 27.005 AT COMMANDS FOR SMS AND CBS 89 AT Commands for EV-DO-EV3 Modems Parameters and Values <index> Message index. The output de
CONTENTS 9 AT Commands for EV-DO-EV3 Modems Socket Listen #SL ...
3GPP TS 27.005 AT COMMANDS FOR SMS AND CBS AT Commands for EV-DO-EV3 Modems 90 <priority> Priority. Priority depends on carrier. For Sprin
3GPP TS 27.005 AT COMMANDS FOR SMS AND CBS 91 AT Commands for EV-DO-EV3 Modems +CMGR: 2,"",28 06801642423127068068226350541002000212DB97
3GPP TS 27.005 AT COMMANDS FOR SMS AND CBS AT Commands for EV-DO-EV3 Modems 92 Notes PDU Mode Echoing given characters back from the TA is contr
3GPP TS 27.005 AT COMMANDS FOR SMS AND CBS 93 AT Commands for EV-DO-EV3 Modems Parameters and Values Text Mode <da> Destination address, st
3GPP TS 27.005 AT COMMANDS FOR SMS AND CBS AT Commands for EV-DO-EV3 Modems 94 Syntax Command Command type (PDU Mode) AT+CMGW=<length>[,<
3GPP TS 27.005 AT COMMANDS FOR SMS AND CBS 95 AT Commands for EV-DO-EV3 Modems 80 <type_addr: 128> 1096224658F1 <callback
3GPP TS 27.005 AT COMMANDS FOR SMS AND CBS AT Commands for EV-DO-EV3 Modems 96 Example Text Mode AT+CMGW=? OK AT+CMGF=1 OK AT+CMGW > Test messag
3GPP TS 27.005 AT COMMANDS FOR SMS AND CBS 97 AT Commands for EV-DO-EV3 Modems Parameters and Values <index> In the message storage <mem
3GPP TS 27.005 AT COMMANDS FOR SMS AND CBS AT Commands for EV-DO-EV3 Modems 98 Parameters and Values <index> Message index in the selected s
CUSTOM AT COMMANDS 99 AT Commands for EV-DO-EV3 Modems Custom AT Commands General Configuration AT Commands Manufacturer Identification #CGMI Ex
Comments to this Manuals