Multitech MT5634HD16 User's Guide download pdf (Page 26)

MT5634HD8/16 User Guide

20 CommPlete Communications Server

connection is made with error correction or compression enabled. These responses are called

result codes

and they can be terse (numbers) or verbose (text).

En Echo Command Mode Characters

= 0 or 1

Default: E1

Normally, when you type commands on the keyboard, the modem echoes the characters back to the

computer or terminal, which displays them on the monitor. Use the E command to turn this feature off

and on.

E0 disables the echo.

E1 enables the echo.

Qn Result Codes Enable/Disable

= 0 or 1

Default: Q0

You can use the Q command to enable or disable result codes for applications such as computer-controlled

auto dialing.

Q0 (or Q) enables result codes.

Q1 disables result codes for applications such as computer-controlled auto-dialing.

Vn Result Codes (Verbose/Terse)

= 0 or 1

Default: V1

The V command controls whether the modem’s result codes display as text (“verbose”) or numeric

(“terse”) messages. For example, if no carrier signal is detected after dialing, the result can be displayed

either as

NO CARRIER, or as the number 3.

V0 (or V) displays the modem’s result codes as a number.

V1 displays result codes as text.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 83 84

No comments

Multitech MT5634HD16 User's Guide Page 26