Multitech MT9234ZPX-UPCI User's Guide download pdf (Page 8)

8 MultiModem ZPX UPCI/PCIe User Guide

Chapter 2 – Windows Installation

Use the procedures in this chapter to install Windows drivers before you install modem into a PCI slot.

Note: The drivers are the same for the MT9234ZPX-UPCI and the MT9234ZPX-PCIE Express products.

After you install the drivers and hardware, you may need to configure the modems for your country/region. The

procedure for doing this is in Chapter 5 – Configuring the Modem for Your Country.

Downloading the Windows Drivers

Note: Drivers for all Windows operating systems are included in the same zip.

1. Login as an administrator. Installing a device driver modifies your system. For this reason, you must have

administration rights to install the driver. If you do not have administrator rights, find someone in your

organization with this authorization.

2. Go to the Multi-Tech Installation Resources website at http://www.multitech.com/setup/product.go and

select your model from the Product drop down list.

3. Click Drivers.

4. Click the link for the Windows drivers.

5. Open the zip file and extract the files to a folder in your Program directory.

Note: To select the correct drivers, you will need to know if you have a 32-bit or 64-bit operating system. If you

do not know which version you have, Microsoft’s Knowledge Base has steps for identifying the version.

Using the Windows Installer

1. Open the folder where you extracted the zip files.

2. Double-click Drivers and then double-click the folder for your operating system. Options are:

● Win32bit-Vista-2008-Win7

● Win32bit-XP-2003

● Win64bit-amd-Vista-2008-Win7

● Win64bit-amd-XP-2003

● Win64bit-ia-Vista-2008-Win7

● Win64bit-ia-XP-2003

3. Double-click dpinst.exe to run Device Installer.

4. Click Yes when prompted to confirm that you want to run the file.

5. Click Next to start the driver installation.

6. Click Continue Anyway each time you are shown the Windows Logo testing window.

7. Click on the Finish button. Your driver installation is complete.

8. If you have not already done so, you can now shut down the PC, unplug the power cord and physically install

your card per the instructions found in Chapter 3 – Hardware Installation.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 35 36

No comments

Multitech MT9234ZPX-UPCI User's Guide Page 8