Multitech MA100-1M User's Guide download pdf (Page 11)

Quick Start Guide

Setting Up the Mail Server

1. From the Administration screen, go to the SMTP

Configuration fields.

2. Enter the mail server address in the SMTP Server Address

window (e.g., mail.multitech.com or IP address).

3. Enter the SMTP Port (usually 25) that is used as the SMTP

Server.

4. Enter the E-mail address of the administrator in the

Administrator E-mail window.

5. If the SMTP Server requires a User ID, enter the ID in the

SMTP Server User ID window.

6. If the SMTP Server requires a password, enter the

password in the SMTP Password window.

7. If you enter a password, retype the identical password in the

Retype SMTP Password window.

8. Click on Update. At this point the MA100-1M will send the

Administrator an email saying that the mail server address

has been updated.

Modem Setup

The Modem Setup menu group defines the Modem Sharing

behavior and the General Modem Setup Group defines the

Country Code and number of rings before auto answer.

If you are using your MultiAccess for dial-in PPP access (RAS

solution), you do not have to modify Modem sharing, but, you

have to select the Country Code. If you are using your

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 17 18

No comments

Multitech MA100-1M User's Guide Page 11