Models ISI3334/4ISI3334/8Intelligent Serial Interface CardwithIntegrated Data/Fax ModemsQuick Start Guide
ISI3334-4/8 Quick Start Guide10Safety Warnings1. Never install telephone wiring during a lightning storm.2. Never install telephone jacks in wet loca
Chapter 2 - Installation11Installation ProcedureStep Procedure1 Make sure your computer and any peripheral equipment connected to it are turned off. F
ISI3334-4/8 Quick Start Guide12Software/Driver InstallationIntroductionThis chapter describes software/driver installation for the ISI cards when use
Chapter 2 - Installation1312. In the Models list, highlight "Multi-Tech ISI4608-ISA 4 Port Serial Card" for ISI3334-4 or "Multi-Tech I
ISI3334-4/8 Quick Start Guide14A. In the Resource Settings field, select "Input/Output Range" and click on Change Setting. The Edit Input/
Chapter 2 - Installation15Installing Modems to COM Ports in Windows 20001. After the ISI driver has been installed and rebooting is complete, the
ISI3334-4/8 Quick Start Guide16ISI3334 for Windows 2000: Installing ISI Management Software (server OSsonly)If you are using a Windows 2000 S
Chapter 2 - Installation173. Turn on the PC and start Windows NT.4. Insert the ISI driver CD-ROM into the CD-ROM drive. (In some cases, drivers may b
ISI3334-4/8 Quick Start Guide18 After the last ISI card has been added, click Close.12. The file is copied and "Multi-Tech ISI3334 Adapte
Chapter 2 - Installation19 For the ISI3334-4, you should have reserved 4 modem ports during driver installation. For the ISI3334-8, you should have
Quick Start Guide82085401 Revision B 8/25/00ISI3334-4/8This publication may not be reproduced, in whole or in part, without prior expressed written
ISI3334-4/8 Quick Start Guide2011. When all devices have been added, click Continue.12. After the bindings have been reviewed and stored, you will be
Chapter 2 - Installation216. Launch the setup program. (From Windows Explorer, double-click on setup.exe; from the Run menu, click OK.)7. The install
ISI3334-4/8 Quick Start Guide2214. Click on Set Configuration Manually.15. Set the "Input/Output Range" to match the Base I/O Setting that
Chapter 2 - Installation23Installing ISI3334 Modems to COM Ports in Windows 95 /981. Click Start, Settings, Control Panel, and then double-click th
ISI3334-4/8 Quick Start Guide243. The Install New Modem dialog box appears. Check the box marked "Don't detect my modem; I will select it fr
Chapter 2 - Installation256. When installing the first ISI modem or terminal adapter, the Location Information screen will appear (it does not appear
ISI3334-4/8 Quick Start Guide269. Click Add and repeat installation steps 38 to install modems to the last three modem ports of the ISI3334/4, OR t
Chapter 2 - Installation27NetWare Driver InstallationMulti-Tech Systems provides AIO drivers for the ISI3334 cards, so they can function with Novell
ISI3334-4/8 Quick Start Guide28SCO Open Server 5 Driver InstallationThe ISI driver for SCO Open Server 5 is shipped on CD-ROM (FAT file system) a
Chapter 2 - Installation29- Make sure Device is pointed to the floppy disk.- Make sure that the Type is cpio.- Select Continue.5. To verify that the
iiiContentsChapter 1 - Introduction and Description ... 5Introduction ...
ISI3334-4/8 Quick Start Guide30MultiTech Installation ScriptThe Multi-Tech Installation Script for SCO Open Server 5 systems requests information abou
Chapter 2 - Installation314. The confirmation screen lists the values you have selected. The following text appears on the screen (default values are
ISI3334-4/8 Quick Start Guide32Multi_Setup UtilityThis section guides you through the Multi-Tech Setup Utility for SCO Open Server 5.0 systems. The M
Chapter 2 - Installation33Multi_View Utility InstallationThis section guides you through the Multi_View Utility for SCO and UNIXWare systems. During
ISI3334-4/8 Quick Start Guide34The following options are defined:Options Description-h Prints the help file. Multi_View uses the environment variable
Chapter 2 - Installation35ps Describes the escape sequence that needs to be sent to the terminal to switch to theappropriate physical page. The physic
ISI3334-4/8 Quick Start Guide36unavoidably garbled from different virtual screen outputs.Some important ASCII unprintable characters and their octal v
Chapter 2 - Installation37Linux Driver for ISI3334 Server CardsLINUX: Pre-Installation IssuesWhen unpacking the Linux driver, there may be two
ISI3334-4/8 Quick Start Guide38LINUX: Driver installation and loadingExecute the 'Install' script to build the driver and to copy the driver
Chapter 2 - Installation39The ISI Linux driver creates the following TTY devices in /dev directory:- /dev/ttyM1a TO /dev/ttyM1p for the first ISI card
ivLINUXLinux Driver for ISI3334 Server Cards ...
ISI3334-4/8 Quick Start Guide40LINUX -- PPP setup:The 'PPP-HOWTO' (a document that is available as a part of the 'HOWTO' documenta
Chapter 3 - Service, Warranty & Tech Support
ISI3334-4/8 Quick Start Guide42IntroductionThis chapter starts out with statements about your MultiModemISI's 2-year warranty. The next section,
Chapter 3 - Warranty, Service and Tech Support43Addendum for International ProductsDistributors should contact Amex, Inc., for information about t
ISI3334-4/8 Quick Start Guide44
ISI3334/4/8 User Guide46IndexAactivating ports in SCO 31CCOM portsinstalling modems toin Linux 39in Netware 27in SCO 31in Windows 2000 15in Windows 95
Index47MModem Features 6modem installLinux 38Netware 27SCO 31Windows 2000 15Windows 95/98 23Windows NT 18modemsactivating portsSCO 31installing to COM
ISI3334-4/8 Quick Start Guide48
Chapter 1 - Introduction and Description
ISI3334-4/8 Quick Start Guide6IntroductionWelcome to the world of data communications. You have acquired one of the finest Intelligent Serial Interfac
Chapter 1 - Introduction and Description7Network managers have the option of starting with the basic four modem configuration (model #ISI334/4), and t
ISI3334-4/8 Quick Start Guide8
Chapter 2 - Installation
Comments to this Manuals