Multitech PROXYSERVER MTPSR1-120 User's Guide download pdf (Page 20)

Firewall User Guide

Wizard Setup

The Wizard Setup screen gives you a process for adding the basic information needed to

configure your Firewall. This screen will guide you through entering the IP Address, Net Mask,

and Default Route for your Secure (private) LAN. Then you can set up for static or dynamic

addressing on the Internet LAN Port, set up the Gateway Parameters, and then do the same for

the WAN port, if it is used.

9. Click Yes to run the Wizard Setup.

Clicking No takes you to the program group (icons), where you can choose a utility from

the program group.

IP Wizard Setup

The IP Wizard Setup dialog box guides you through assigning LAN and WAN IP address

information and determining if your LAN is already running a DHCP Server that will automatically

assign Client IP addresses if enabled.

10. Change the default IP Address, Mask, and Default Route to the unique parameters for

your Secure (private) LAN connected to the LAN 1 Port.

Follow the on-screen instructions.

Secured LAN (LAN 1) Setup

11. If an Internet (public) LAN is connected to the LAN 2 Port, click the Internet LAN option

in the Select Port window, then either leave the DHCP Client option enabled or disable

(uncheck) it and assign the proper IP Address, Net Mask, and DNS Server addresses for

your Internet LAN. Follow the on-screen instructions and enter a Gateway IP Address,

too, if the DHCP function is disabled.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 79 80

No comments

Multitech PROXYSERVER MTPSR1-120 User's Guide Page 20