Multitech MT9234ZPX-UPCI Specifications download pdf (Page 5)

Multi-tech Systems, Inc. 5

Installing your MultiModem

Before inserting your ZPX into a PCI slot, please run the Windows Installer program

from your product CD. This makes all Windows operating systems installations

faster than the manual methods described in the User Guide.

1. Turn off your system and unplug it. Failure to do so may result in damage to

both the MultiModem and your system. Do not turn on the system until the

instructions tell you to do so.

2. Remove the cover from your system as instructed in the system manual.

Before handling the ISI Card, discharge any static in your body by touching

a piece of grounded metal such as the computer chassis. Electrostatic

discharge (ESD) is the release of stored static electricity that can damage

electrical circuitry or components. Static electricity is often stored in your

body, and discharged when you come in contact with an object of a different

potential.

Perform the procedure below described in this section only at an ESD

workstation using an antistatic wrist strap. If such a station is not available,

you can provide some ESD protection by wearing an antistatic wrist strap

and attaching it to a metal ground screw (lug).

3. If you are installing a MT9234ZPX-PCIe board in a low profile machine, you

will have to change the mounting bracket to the low profile mounting bracket.

Refer to your User Guide for low profile mounting bracket details.

4. Select an empty PCI expansion slot. Remove the expansion slot cover and

save the retaining screw.

5. Before handling the MultiModem, discharge static in your body by touching a

bare piece of metal on the chassis. Carefully remove the MultiModem from its

antistatic bag, handling it only by the mounting bracket and edges. Do not

touch the gold-plated connectors along the bottom edge.

6. Look at the system’s main board to determine either PCI or Express

connector. Place the MultiModem directly above the expansion slot and

gently, but firmly, push it into the connector until the card’s retaining bracket

is flush against the system chassis.

7. Fasten the retaining bracket to the system chassis with the screw saved in

step 4.

8. Replace the system cover.

1 2 3 4 5 6 7 8

No comments

Multitech MT9234ZPX-UPCI Specifications Page 5