82000350
Installation Instructions for
MVP24-48 & MVP30-60 Expansion Cards
Both the MVP2410 and the MVP3010 use the same mechanical chassis.
This chassis accommodates a second MultiVOIP circuit card or
motherboard module. The add-on module for the MVP2410 is the
MVP24-48 product; the add-on module for the MVP3010 is the
MVP30-60 product.
To install an expansion card into an MVP2410 or MVP3010, you must:
1. Power down and unplug the MVP2410/3010 unit.
2. Using a Phillips or star-bit screwdriver, remove the blank plate at
the rear of the MVP2410/3010 chassis (see Figure 1). Save the screw.
Figure 1: Remove Plate Covering Expansion Slot
Comments to this Manuals