Multitech RF650VPN User Manual download pdf (Page 34)

FriendlyNET VPN Security Router

Your selections should look like this:

•

LAN Side Filter Enabled: Enabled

•

Default LAN Side Filter: Pass

•

Filter Entry: Block

•

Protocol: TCP

•

IP Address Range: 192.168.123.10 to 192.168.123.20

•

Destination Port Range: 119-119

Click Save to add the filter rule (to delete a filter rule, check the “del”

box and click the del button).

This filter will prevent any LAN user whose IP address is in the indi-

cated range from using NNTP.

3.5.2 WAN Filter Settings

Next, access the WAN Filter Settings page by selecting the button

from the left-side menu. A WAN Filter works similarly to the LAN

Filter. If, for example, you need to run a web server from behind

your firewall at your home office, but you only want people in your

main office to be able to connect to it, you would want to make the

default policy of your WAN Filter Block.

Your setting would look something like this:

•

WAN Side Filter Enabled: Enabled

•

Default WAN Side Filter: Block

•

Filter Entry: Pass

•

Protocol: TCP

•

IP Address Range: 172.16.203.1 to 172.16.203.254

•

Destination Port Range: 80-80 (HTTP)

Click Save to add the filter rule. These settings will allow people in

your office (where the IP addresses are in the range indicated) to

connect to your web server (since web servers use TCP port 80),

but will not allow anyone else to connect.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 75 76

No comments

Multitech RF650VPN User Manual Page 34