Multitech MultiModem DSVD MT5600DSVD Instruction Manual Page 6

  • Download
  • Add to my manuals
  • Print
  • Page
    / 35
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 5
vi Preface
Welcome
The SmartServer is a low-cost, high-performance controller, network manager, router, remote network
interface, and Web server that you can use to connect L
ONWORKS , Modbus, and M-Bus devices to
corporate IP networks or the Internet.
You can connect the SmartServer to a L
ONWORKS TP/FT-10 channel using the LonTalk connections
on the hardware and a high-voltage 100/240V AC mains connection. You can connect the SmartServer
to a PL-20 L
ONWORKS channel through the high-voltage 100/240V AC mains connection. You can
also connect a special PL-20 model of the SmartServer that has an external coupling circuit to a
single-phase or three-phase external coupler.
The SmartServer hardware includes a RS-232 port for connecting external GSM modems, M-Bus and
Modbus devices, and other device types, and a RS-485 port for connecting Modbus devices and other
device types. In addition, the SmartServer has two digital inputs, two digital outputs, and two pulse
meter inputs for connecting electric, gas, and water meters.
Once you have wired all the connections for the SmartServer, you can connect the SmartServer to
TCP/IP networks using its RJ-45 10/100 BaseT Ethernet port. You can also connect models of the
SmartServer that have built-in 56K V.90 analog modems to TCP/IP networks using their RJ-11
telephone line ports and a dial-out connection.
Optionally, you can connect the RS-232 console port on the SmartServer to a computer running a
terminal emulation program such as Windows HyperTerminal. This enables you to configure the
SmartServer using its console application. Note that you should configure the SmartServer with its
built-in Web pages whenever possible.
Purpose
This document describes how to assemble, mount, and wire the SmartServer hardware. It also
describes the service buttons and LEDs on the SmartServer hardware.
Audience
This guide is intended for Echelon’s customers, OEMs, system designers, and integrators with an
understanding of control networks.
Models
There are 11 models of the SmartServer available for use on TP/FT-10 free topology and PL-20 power
line channels. This includes the following:
Seven high-voltage TP/FT-10 models that include none to all of the following options: IP-852
routing, programming, modem, and LNS Server.
Three PL-20 models that include none to all of the following options: IP-852 routing,
programming, and LNS Server.
One PL-20 model that includes an external coupling circuit. The external coupling circuit enables
the PL-20 model to communicate over virtually any AC or DC power mains.
Page view 5
1 2 3 4 5 6 7 8 9 10 11 ... 34 35

Comments to this Manuals

No comments