Multitech MTCMR-H User's Guide Page 91

  • Download
  • Add to my manuals
  • Print
  • Page
    / 147
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 90
Chapter 3 – Supported GSM/WCDMA AT Commands
High Speed HSPA-H4 AT Commands Reference Guide (Document S000483A) 91
(list of supported <Guaranteed bitrate UL>s), (list of supported <Guaranteed bitrate
DL>s), (list of supported <Delivery order>s), (list of supported <Maximum SDU size>s),
(list of supported <SDU error ratio>s), (list of supported <Residual bit error ratio>s), (list
of supported <Delivery of erroneous SDUs>s), (list of supported <Transfer delay>s), (list
of supported <Traffic handling priority>s)
OK
Read Command AT+CGEQMIN?
Read Response: +CGEQMIN: [<cid>, <Traffic class>, <Maximum bitrate UL>, <Maximum bitrate DL>,
<Guaranteed bitrate UL>, <Guaranteed bitrate DL>, <Delivery order>, <Maximum SDU
size>, <SDU error ratio>, <Residual bit error ratio>, <Delivery of erroneous SDUs>,
<Transfer delay>, <Traffic handling priority>]
[+CGEQMIN: <cid>, <Traffic class>, <Maximum bitrate UL>, <Maximum bitrate DL>,
<Guaranteed bitrate UL>, <Guaranteed bitrate DL>, <Delivery order>, <Maximum SDU
size>, <SDU error ratio>, <Residual bit error ratio>, <Delivery of erroneous SDUs>,
<Transfer delay>, <Traffic handling priority>]
[+CGEQMIN: ...]
Write Command: AT+CGEQMIN=<cid>[, <Traffic class>[, <Maximum bitrate UL>[, <Maximum bitrate
DL>[, <Guaranteed bitrate UL>[, <Guaranteed bitrate DL>[, <Delivery order>[,
<Maximum SDU
size>[, <SDU error ratio>[, <Residual bit error ratio>[, <Delivery of erroneous SDUs>[,
<Transfer delay>[, <Traffic handling priority>]]]]]]]]]]]]
Write Response: OK
ERROR
+CME ERROR <err>
Parameter Descriptions:
<cid>
Parameter specifies a particular PDP context definition. The parameter is used in
other PDP context-related commands.
1...16
<Traffic class>
0 Conversational
1 Streaming
2 Interactive
3 Background
4 Default. Subscribed value.
<Maximum bitrate UL>
This parameter indicates the maximum number of kbits/s delivered to UMTS (up-link
traffic) at a SAP. As an example a bitrate of 32kbit/s would be specified as 32 (e.g.,
AT+CGEQMIN=...,32,...).
0 Default. Subscribed value.
1...512
<Maximum bitrate DL>
This parameter indicates the maximum number of kbits/s delivered by UMTS (down-
link traffic) at a SAP. As an example a bitrate of 32kbit/s would be specified as 32
(e.g., AT+CGEQMIN=...,32,...).
0 Default. subscribed value.
1...16000
<Guaranteed bitrate UL>
This parameter indicates the guaranteed number of kbits/s delivered to UMTS (up-
link traffic) at a SAP (provided that there is data to deliver). As an example a bitrate
of 32kbit/s would be specified as 32
(e.g., AT+CGEQMIN=...,32,...).
0 Default. Subscribed value.
1...512
Page view 90
1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 146 147

Comments to this Manuals

No comments