Multitech MTCMR-H User's Guide Page 89

  • Download
  • Add to my manuals
  • Print
  • Page
    / 147
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 88
Chapter 3 – Supported GSM/WCDMA AT Commands
High Speed HSPA-H4 AT Commands Reference Guide (Document S000483A) 89
+CGDATA Enter Data State
Description: This command causes the modem to perform the necessary actions to set up
communication between the DTE and the network. This may include performing a GPRS
attach and one PDP context activation.
GPRS attachment and PDP context activation procedures may take place prior to or during
the PDP startup if they have not already been performed using the +CGATT and +CGACT
commands.
If the activation is successful, data transfer may proceed.
After data transfer and layer 2 protocol termination procedure completion, the V.25ter
command state is re-entered and the modem returns the final result code OK.
Syntax:
Command Responses
Action Command:
AT+CGDATA [=<cid>]
CONNECT
Test Command:
AT+CGDATA=?
+CGDATA:
OK
No Read Command
Values: <cid> PDP Context Identifier
Range: 1-4
Integer type
Parameter Storage: None
Examples:
Command Responses
A
T+CGDATA=? +CGDATA: "PPP"
OK
A
T+CGDATA=1 CONNECT
+CGDCONT Define PDP Context
Description: This command specifies PDP context parameter values for a PDP context identified by the
local context identification parameter, <cid>. Four PDP contexts can be defined through the
software.
Syntax:
Command Responses
Action Command:
AT+CGDCONT=<cid>[,<PDP_type>[,
<APN>[,<PDP_addr>[,<d_comp>
[,<h_comp>]]]]]
OK
Read Command:
AT+CGDCONT?
+CGDCONT:
<cid>,<PDP_type>,<APN>,<PDP_addr>,
<d_comp>, <h_comp>
[+CGDCONT: <cid>,<PDP_type>,<APN>,
<PDP_addr>,<d_comp>,<h_comp> […]]
OK
Test Command:
AT+CGDCONT=?
+CGDCONT: (list of supported <cid>s),
<PDP_type>,,,
(list of supported <d_comp>s),
(list of supported <h_comp>s)
[+CGDCONT: (list of supported <cid>s),
<PDP_type>,,,(list of supported <d_comp>s),
(list of supported <h_comp>s)[…]]
OK
Page view 88
1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 146 147

Comments to this Manuals

No comments