Multitech MTCMR-H User's Guide download pdf (Page 87)

Chapter 3 – Supported GSM/WCDMA AT Commands

High Speed HSPA-H4 AT Commands Reference Guide (Document S000483A) 87

Parameter Storage: None

Examples:

Command Responses

AT+CFUN=?

+CFUN: (0,1) , (0,1)

AT+CFUN?

Note: Ask for current functionality level

+CFUN: 1

Note: Full functionality

AT+CFUN=0

Note: Set minimum functionality, IMSI detach

procedure

AT+CFUN=1,0

Note: Set the full functionality mode with a

complete software reset

AT+CFUN=1,0 +CME ERROR: 3

Note: No Power Off done before

(CFUN=0, CFUN=4 or CPOF)

AT+CFUN=1

Note: Set the full functionality mode with a

complete software reset

+CGACT PDP Context Activate or Deactivate

Description: This command activates or deactivates the specified PDP context(s). After the command is

completed, the modem remains in V.25ter command state. If any PDP context is already in

the requested state, the state for that context remains unchanged.

Syntax:

Command Responses

Action Command:

AT+CGACT=<state>[,<cid>[,<cid>[,…]]]

Read Command:

AT+CGACT?

+CGACT: <cid>,<state>

[+CGACT: <cid>,<state>[…]]

Test Command:

AT+CGACT=?

+CGACT: (list of supported <state>s)

Values: <state> State of PDP Context Activation

0 Deactivated

1 Activated

<cid> PDP Context Identifier

Range: 1-4

Integer type

Parameter Storage: None

Examples:

Command Responses

AT+CGDCONT=1,"IP","APN"

T+CGACT=1,1 OK

T+CGACT? +CGACT: 1,1

T+CGACT=? +CGACT: (0-1)

T+CGACT=0

Note: Deactivate all contexts

T+CGACT=1

Note: Activate first possible context

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 146 147

Comments to this Manuals

No comments

Multitech MTCMR-H User's Guide Page 87

Comments to this Manuals

Related products and manuals for Networking Multitech MTCMR-H