Multitech MTCMR-H User's Guide Page 76

  • Download
  • Add to my manuals
  • Print
  • Page
    / 147
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 75
Chapter 3 – Supported GSM/WCDMA AT Commands
High Speed HSPA-H4 AT Commands Reference Guide (Document S000483A) 76
<bm> Sets the result code indication routing for received Cell Broadcast Messages.
Default is 0.
0 No CBM indications are routed to the TE. The CBMs are not stored.
2 or 3 New CBMs are routed directly to the TE using unsolicited result code (format
matches that of +CBM: <oa>, [<alpha>,] <scts> [,<tooa>, <length>]
<CR><LF><data> (text mode)
<ds> Sets the routing for SMS-STATUS-REPORTs. Default is 0.
0 No SMS-STATUS-REPORTs are routed.
1 SMS-STATUS-REPORTs are routed using unsolicited code: +CDS: <fo>, <mr>,
[<ra>] , [<tora>], <scts>, <dt>, <st> (Text mode)
<bfr> Since <mode> cannot be changed, this parameter is no longer used, but these
values are still accepted for legacy purposes. Default is 0.
0 TA buffer of unsolicited result codes defined within this command is flushed to the
TE when <mode> 1…3 is entered (OK response shall be given before flushing the
codes)
1 TA buffer of unsolicited result codes defined within this command is cleared when
<mode> 1…3 is entered.
+CPMS Preferred Message Storage
Description: This command allows the message storage area to be selected (for reading, writing, etc).
The total storage area size is: 100 for “MT”. In the future when the RUIM is supported, the
size will vary dependent on the configuration of the SIM card.
Syntax: Command syntax: AT+CPMS=<mem1>,<used>,<total>
Command Possible Responses
AT+CPMS=?
Note: Display available message storage areas.
+CPMS: (“MT”)
OK
AT+CPMS?
Note: Display currently selected area information.
+CPMS: “MT”,3,99
OK
AT+CPMS=”BC”
Note: Select invalid message storage area.
+CMS ERROR: 302
AT+CPMS=”MT”
Note: Select NV message storage
+CPMS: 0,99
OK
Values: <mem1> Memory area to be used to list, read and delete messages. It can be:
“MT” SMS Mobile Terminated message storage in NV (default)
Each reported memory area includes information about current used & total
storage locations. When <mem1> is selected, all following +CMGL, +CMGR and
+CMGD commands are related to the type of SMS stored in this memory.
<used> The number of used storage locations in the reported area.
<total> The total number of available storage locations.
Page view 75
1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 146 147

Comments to this Manuals

No comments