Multitech MTCMR-H User's Guide Page 73

  • Download
  • Add to my manuals
  • Print
  • Page
    / 147
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 72
Chapter 3 – Supported GSM/WCDMA AT Commands
High Speed HSPA-H4 AT Commands Reference Guide (Document S000483A) 73
+CNMA New Message Acknowledgement to ME/TE
Description: The write / execute command confirms successful receipt of a new message (SMS-
DELIVER or SMS-STATUS-REPORT) routed directly to the TE. If ME does not receive
acknowledgment within required time (network time-out), ME sends RP-ERROR to the
network. TA shall automatically disable routing to TE by setting both <mt> and <ds>
values of AT+CNMI to zero.
Syntax:
Test Command: AT+CNMA=?
Test Response: +CNMA: (list of supported <n>s)
OK
Exec. Command: AT+CNMA
Exec. Response: OK
ERROR
+CMS ERROR <err>
Write Command: AT+CNMA=<n>
Write Response: OK
ERROR
+CMS ERROR: <err>
Parameter Description:
<n> Parameter required only for PDU mode.
0 Command operates similarly as in text mode.
1 Send positive (RP-ACK) acknowledgement to the network. Accepted only in PDU mode.
2 Send negative (RP-ERROR) acknowledgement to the network. Accepted only in PDU
mode.
Note:
The execute / write command shall only be used when AT+CSMS parameter <service> equals 1 (= phase
2+) and appropriate URC has been issued by the module; i.e.:
<+CMT> for <mt>=2 incoming message classes 0,1,3 and none;
<+CMT> for <mt>=3 incoming message classes 0 and 3;
<+CDS> for <ds>=1.
+CMS ERROR Message Service Failure Result Code
<er> Meaning Resulting from the following commands
1 to 127 Error cause: values +CMGS, +CMSS
301 SMS service of ME reserved +CSMS (with +CMS: ERROR 301)
302 Operation not allowed All SMS commands
303 Operation not supported All SMS commands
304 Invalid mode parameter +CMGS, +CMGW
305 Invalid text mode parameter +CMGS, +CMGW, +CMSS
313 SIM failure All SMS commands
321 Invalid memory index +CMGR, +CMSS, +CMGD
322 SIM or modem memory full +CMGW
330 SC address unknown +CMSS, +CMGS
340 no +CNMA acknowledgement expected +CNMA
Page view 72
1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 146 147

Comments to this Manuals

No comments