Multitech MTCMR-H User's Guide Page 39

  • Download
  • Add to my manuals
  • Print
  • Page
    / 147
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 38
Chapter 2 – Modem-Specific Commands
High Speed HSPA-H4 AT Commands Reference Guide (Document S000483A) 39
<ssc> (Secondary Scrambling Code):
Valid range: 0–FFFF
<sttd> (Common Pilot Channel (CPICH) supports Space Time Transit Diversity):
0 = Not supported
1 = Supported
<totEcIo> (Total Ec/Io):
Valid range: 00–FF
To convert to a dB value, convert to decimal and divide by -2.
Example: 0x0B / -2 = 11 / -2 = -5.5 dB
Note: The command AT+ECIO? also reports Total Ec/Io as a dB value.
<EcIo> (Best path Ec/Io):
Valid range: 00–FF
To convert to a dB value, convert to decimal and divide by -2.
Example: 0x0B / -2 = 11 / -2 = -5.5 dB
<rscp> (Received Signal Code Power):
Valid range: 0-FFFF
<winSize> (Search window size):
Valid range: 0000–FFFFFFFF
&V Return Operating Mode AT Configuration Parameters
Syntax: Execution: AT&V
Response: &C: 2; &D: 2; &F: 0; E: 1; L: 0; M: 0; Q: 0; V: 1; X: 0; Z: 0; S0: 0; S2: 43; S3:
13; S4: 10; S5: 8; S6: 2; S7: 50; S8: 2; S9: 6; S10: 14; S11: 95;
+FCLASS: 0; +ICF: 3,3; +IFC: 2,2; +IPR: 115200; +DR: 0; +DS:
0,0,2048,6;+WS46: 12; +CBST: 0,0,1;+CRLP:
(61,61,48,6,0),(61,61,48,6,1),(240,240,52,6,2);+CV120:
1,1,1,0,0,0; +CHSN: 0,0,0,0; +CSSN: 0,0; +CREG: 0;
+CGREG: 0;+CFUN:; +CSCS: "IRA"; +CSTA: 129; +CR: 0;
+CRC: 0; +CMEE: 2; +CGDCONT: (1,"IP","","",0,0);
+CGDSCONT: ; +CGTFT: ; +CGEQREQ: ; +CGEQMIN: ;
+CGQREQ: ; +CGQMIN: ;+CGEREP: 0,0; +CGDATA: "PPP";
+CGCLASS: "A"; +CGSMS: 3; +CSMS: 0;+CMGF: 0; +CSCA:
"",; +CSMP: ,,0,0; +CSDH: 0; +CSCB: 0,"",""; +FDD: 0;+FAR: 0;
+FCL: 0; +FIT: 0,0; +ES: ,,; +ESA: 0,,,,0,0,255,; +CMOD:
0;+CVHU: 0; +CPIN: ,; +CMEC: 0,0,0; +CKPD: 1,1; +CGATT:
0; +CGACT: 0;+CPBS: "SM"; +CPMS: "SM","SM","SM";
+CNMI: 0,0,0,0,0; +CMMS: 0; +FTS: 0;+FRS: 0; +FTH: 3;
+FRH: 3; +FTM: 96; +FRM: 96; +CCUG: 0,0,0;+COPS: 0,0,"";
+CUSD: 0; +CAOC: 1; +CCWA: 0; +CPOL: 0,2,""; +CTZR:
0;+CLIP: 0; +COLP: 0; +CMUX: 0,0,5,31,10,3,30,10,2;!CMUX:
0,0,5,31,10,3,30,10,2
OK
Purpose: Display command parameters.
Description: Return the status of all AT command parameters that apply to the current operating
system.
Page view 38
1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 146 147

Comments to this Manuals

No comments