Multitech MTCMR-H User's Guide download pdf (Page 35)

Chapter 2 – Modem-Specific Commands

High Speed HSPA-H4 AT Commands Reference Guide (Document S000483A) 35

^SYSCONFIG Set/Return System Configuration Information

Syntax: Execution: AT^SYSCONFIG=<mode>, <acqOrder>, <roam>, <srvDomain>

Response: OK

Purpose: Set the various configuration parameters. You must specify all of the

parameters.

Query: AT^SYSCONFIG?

Response: <mode>, <acqOrder>, <roam>, <srvDomain>

Purpose: Return the current modem configuration information.

Description: Set or return the modem’s configuration.

Parameters: <mode> (Supported system mode):

2 = Auto-select

13 = GSM only

14 = WCDMA only

16 = No change—use this value with ^SYSCONFIG= if you do not want to change the

current setting.

<acqOrder> (Network acquisition order)

0 = Automatic

1 = GSM, then WCDMA

2 = WCDMA, then GSM

3 = No change—use this value with ^SYSCONFIG= if you do not want to change the

current setting.

<roam> (Roaming support)

0 = Not supported

1 = Supported

2 = No change—use this value with ^SYSCONFIG= if you do not want to change the

current setting.

<srvDomain> (Service domain support)

0 = Circuit-switched only

1 = Packet-switched only

2 = Circuit- and packet-switched

3 = Any

4 = No change—use this value with ^SYSCONFIG= if you do not want to change the

current setting.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 146 147

No comments

Multitech MTCMR-H User's Guide Page 35