Multitech MTCMR-H User's Guide Page 132

  • Download
  • Add to my manuals
  • Print
  • Page
    / 147
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 131
Chapter 3 – Supported GSM/WCDMA AT Commands
High Speed HSPA-H4 AT Commands Reference Guide (Document S000483A) 132
AT+CREG=? +CREG: (0-2)
Note: 0,1,2 <mode> values are supported
AT+CREG?
Note: Get the CREG status
+CREG: 2,1,"006","7D9A"
OK
Note: The modem is registered on the home
network with lac=0006 and cell ID = 7D9A
+CREG: 3
Note: The network indicates that the
registration is denied
AT+CREG?
Note: Get the CREG status
+CREG: 2,1,"006","7D9A"
OK
Note: The modem is registered on the home
network with lac=0006 and cell ID = 7D9A
+CREG: 3,1
Note: The network indicates that the
registration is denied for an illegal mobile
equipment reason
+CRLP Radio Link Protocol Parameters
Description: This command modifies the radio link protocol parameters used for non transparent data
transmission.
Syntax:
Command Responses
Action Command:
AT+CRLP=[<iws>] [,<mws>] [,[<T1>] [,<N2>]
[,[<ver>] ] ] ] ]
OK
Read Command:
AT+CRLP?
+CRLP:
<iws>,<mws>,<T1>,<N2>,<ve
r>
OK
Test Command: AT+CRLP=? +CRLP:
(list of supported <iws>s),
(list of supported <mws>s),
(list of supported <T1>s),
(list of supported <N2>s),
(list of supported <ver>s)
OK
Values:
<iws> Down Window Size
Range: 0-61 (default is 61)
<mws> Up Window Size
Range: 0-61 (default is 61)
<T1> Acknowledgement timer in units of 10ms
Range: 40-255 (default is 48)
<N2> Retransmission attempts
Range: 1-255 (default is 6)
<ver> RLP version number
0 V42bis is not supported
1 V42bis is supported
Parameter Storage: Parameters are stored in EEPROM using AT&W. The default value can be
restored using AT&F.
Page view 131
1 2 ... 127 128 129 130 131 132 133 134 135 136 137 ... 146 147

Comments to this Manuals

No comments