Multitech MTCMR-H User's Guide Page 12

  • Download
  • Add to my manuals
  • Print
  • Page
    / 147
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 11
Chapter 1– Introduction
High Speed HSPA-H4 AT Commands Reference Guide (Document S000483A) 12
ITU-T Recommendation Supported 27.007 AT Commands
These commands are described in Chapter 3.
Command Description Supported
C
ITU T V.24 circuit 109 carrier detect signal behavior command
Format
• C<value>
Limitations
• Default <value> = 2
• <value> = 2 causes the AT/Data carrier detect pin to ‘wink’
(briefly switch off and on) when data calls end.
• <value> = 0 or 1 performs as defined in the standard
Partially
+CACM
Accumulated call meter No
+CACSP
Voice Group or Voice Broadcast Call State Attribute Presentation N/A
+CAEMLPP
eMLPP Priority Registration and Interrogation No
+CAHLD
Leave an ongoing Voice Group or Voice Broadcast Call N/A
+CAJOIN
Accept an incoming Voice Group or Voice Broadcast Call N/A
+CALA
Alarm N/A
+CALCC
List current Voice Group and Voice Broadcast Calls N/A
+CALD
Delete alarm N/A
+CALM
Alert sound mode No
+CAMM
Accumulated call meter maximum No
+CANCHEV
NCH Support Indication No
+CAOC
Advice of Charge No
+CAPD
Postpone or dismiss an alarm N/A
+CAPTT
Talker Access for Voice Group Call N/A
+CAREJ
Reject an incoming Voice Group or Voice Broadcast Call N/A
+CAULEV
Voice Group Call Uplink Status Presentation N/A
+CBST
Select bearer service type Yes
+CCCM
Current call meter value No
+CCFC
Call forwarding number and conditions Yes
+CCLK
Clock N/A
+CCUG
Closed user group Yes
+CCWA
Call waiting Yes
+CCWE
Call Meter maximum event No
+CDIP
Called line identification presentation No
+CDIS
Display control No
+CEER
Extended error report No
+CFUN
Set phone functionality
Format
• +CFUN = [ <fun> [, <rst>] ]
Limitations
• Valid <fun> values:
· 0 (minimum functionality, low power draw)
· 1 (full functionality, high power draw)
Partially
+CGACT
PDP context activate or deactivate Yes
+CGANS
Manual response to a network request for PDP context activation No
+CGATT
PS attach or detach Yes
+CGAUTO
Automatic response to a network request for PDP context
activation
No
+CGCLASS
GPRS mobile station class Yes
+CGCLOSP
Configure local octet stream PAD parameters No
+CGCMOD
PDP Context Modify No
Page view 11
1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 146 147

Comments to this Manuals

No comments