Multitech GFU19 User Manual download pdf (Page 54)

54RX1200

Setting up the Equipment

3.2 Batteries

3.2.1 Operating Principles

)

This chapter is valid for all RX1250 models and GHT56.

)

Primary use/charging

• The battery must be charged prior to using it for the first time because it is deliv-

ered with an energy content as low as possible.

• For new batteries or batteries that have been stored for a long time (> three

months), it is effectual to make only one charge/discharge cycle.

• For Li-Ion batteries, a single discharging and charging cycle is sufficient. We

recommend carrying out the process when the battery capacity indicated on the

charger or on a Leica Geosystems product deviates significantly from the actual

battery capacity available.

• The permissible temperature range for charging is between 0°C to +40°C/ +32°F

to +104°F. For optimal charging we recommend charging the batteries at a low

ambient temperature of +10°C to +20°C/+50°F to +68°F if possible.

• It is normal for the battery to become warm during charging. Using the chargers

recommended by Leica Geosystems, it is not possible to charge the battery if

the temperature is too high.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 209 210

No comments

Multitech GFU19 User Manual Page 54